Viewing all customer Discussions for:

Other

I need tilt latches replaced on the window

Hi, I have a ?15? year old PeachTree wood slider that I need a new handle for. The mounting holes in the door are 5.75" apart (Top & Bottom).Can you suggest a handle ?Regards,Rick

I need a replacement for the latch on our rear sliding door. I do not know who manufactured our door, but after about 12 years, the door latch actuator on the inside of the house broke off. The markings on the door glass are as follows: CTG TEMPERED 16 CFR 1201 II SGCC 1804 1/8 U I have added ph ... (cont.)

Hello, hoping you can match the broken handles I have. Dimensions and pictures below/attached. I'm happy to modify as required, i.e. if the screw holes are not identical. Thank you. Window lock handles Screws 2 7/16" Opening 1.5" Bezel 3 5/6" Lever 1 5/8"

Old Castle is stamped on the window. I think I need P/N S385-29 (both sides) and definitely need the sash stops that screw on the window itself. "28D" is stamped on the sash. 265-2 5E is also stamped on the sash hardware. The nylon stops on the window are broken. Thanks for your help with the ... (cont.)

Pictured are guides for 2 different size windows 2nd marking is 2990 hard to see in picture should I just replace both sides on each at the same time?

I am looking for the top right ( looking at back of door) guide and bracket for sliding mirror closet door

Hello experts,There are no names, numbers or markings on any of the parts, as I can see. The window sash weighs 20 lbs. It's a single coil apparently, half-inch wide. Thanks in advance for your help.-Zhaolai

There is a number stamped 2120 bs1

I have Alside windows from 2003 which several of the shoes have broken. They appear to be the 15-177 you offer, but please confirm. The coils seem to be fine, so is there a reason I should replace these too. Also, my windows are generally hard to open and "sticking" as you lift them. I used sili ... (cont.)

Need a replacement balancer. See photos. Length is 27". Thank you

Is top swimming door guide

I have included 5 photos of the item I need. Please let me know which product number I should use in ordering from your company.Thank you for your assistance.Kathy

596. 298.91.00 made in Germany. Our Wellborn corner cabinet hendge broke and we are trying to find the right henge to replace it.

The door strips on my Chamberdoor have become brittle. Apparently, they have gone out of business. Attached are 2 pictures. The O.D.s are 3/16" x 3/4". Can you recommend a replacement set of strips?

Need 2 rollers

These photos were sent to me. I know I don't have the information described in the video but can we get info from the ruler as scale? Please help if possible with this info .

We too want to replace our Silver Line 5800 door handle with an interior/exterior door lock with key. The deadline interior latch is bent so we want to replace it to include an exterior key lock. Can you please tell us what we need to order? Thank you

Having a very difficult time finding these, it would be great if you could help me find a match. I need at lease 24 sets. Thanks!!

Hi I have these old swing out metal windows from the 40's, I found a few latches that have broke and I'm looking for replacements. I've ordered new cranks from you before and those have worked great, hopefully you'll have this part too. Crank PO: 39-001