Viewing all customer Discussions for:

Other

NEED TO ORDER SOMETHING THAT WILL WORK. TAHNKS

looking for replacement 1959 home. closet bypass doors. I believe these are 3/8 offset 7/8" rollers. all the ones I found locally do not work. drags on bottom

My wife put a little too much weight on the shelf on the front left mounting bracket broke. It appears only the plastic part is broken so only that needs replaced. Neither the cabinet wall nor the long metal part appear damaged. I have attached a picture of where it mounts to the inside wall of the ... (cont.)

I have a custom patio enclosure and the Sliding door became difficult to open and close. The is no manufacturer noted on the door/windows. One of the rollers had a disintegrated bearing. Can you help me find a replacement assembly or even just a roller. The unit is 3 7/8 inched long and a 1/2 inch w ... (cont.)

No numbers are names visible

This is a dresser from the Lexington mansion bed set of over 30+years and need just the ring pulls for it I need 4 of them if possible . I picked up a piece that matched but didn't have the rings for the drawers

I'm unable to acquire this weatherstripping for my sliding door. Do you have a recommendation for a replacement weather strip? Thank you.

- Kraftmaid cabinets installed around 1994 - Angled Corner Wall Cabinet - Frameless/Full Overlay - Looking to replace with a soft-close hinge if possible - Hinge Markings: 674.305.53.00 (Made in Germany) 502.205.76.03 Mepla - Plate Markings: 600.200.13.02

Looking for 2 Unique 28 b 20 balances. Manufacture date was 9/16/97. Metal track is 28 7/8 long and half inch wide. Ends broken but here are photos

Looking for replacement

Does Anderson have a folding handle for casement windows pre 1996? Can I change over to another manufacturer? Looking to change over to white. Please advise. Thanks Sandy

Trying to find right style any help would be great.

window wieghs 15.5 lbs. The old one is 27 inch long not including end pecies. Im looking to replacement part number. Thank for any help. old stilye # is 26-9 DA2 cMC 4

Do you have this handle?

Can't find a handle to fit my door. Not long enough to fit thru door. And pin to thick that connects knob to handle

Update we took it apart for better identification we have tilt windows and need replacement parts

unable to identify part number of window - the windows tilt out for cleaning - was told by the company that installed the window that they were Anderson windows but no one at Anderson can identify the part and the company refuses to provide the manufacturer's name - says they don't have my files. T ... (cont.)

can't find any markings on the window or hardware

Need replacement rollers, but don't know which ones to buy. Please help identify these rollers. Thanks

PAT PEND 5,139,291 .075 IOL