Viewing all customer Discussions for:

Other

sorry I don't have part took it out and it was thrown away by accident. Don't know if you can sell just the part or buy the whole lock. The finger on the shaft broke that flips the dead bolt.

Number on the carrier 590 Pat#5740165. I was also wondering to the replacements come with the springs or are they separate?

I believe I need the 11/32 x 11/32?

I recently bought from you a Legacy keyed handle set because when I went to Home Depot they told me that was the correct one but it was not. The only information I can find on the original one is 21686 Pat pend. Can you help me?

Thank you for your help. This part is broken and the window rod is all the way up because of it. Need to know which part I need and if it's fixable. Thank you.

In Image 1820 - you can see the window has become displaced out of the track on the top. In image 1823- the crank arm is disconnected, this arm does not look like the arm used on the other crank out window, it must have been replaced at some point On the lower track, the window is connected but the ... (cont.)

rear drawer bracket/stop for 1960's Scheirich cabinets basically measure 1.5x2.5x13/16 See photos thank you for any assistance.

My niece has a sash that does not stay up. The windows are about 5 years old. The coil spring appears to have 'escaped' from the 9lb Quick Tilt Balance. Unsure what "series" (i.e 140 series) is needed.

I have not been able to find any markings, tags or any type of wording on these windows. I'm looking forward to your expertise on finding me these so I can replace them all.

The casting broke from almost 4o years of use. The hole spacing is 4" between the mounting screws, Plus and Minus 2" from the latching lever. The wood door is 1 3/4" thick. Name inside casting is: SASH CONTROLS INC. DETROIT 20 MICH. 060-1255Thanks, Harold

Balance length: 38 Balance stamp: 38-45 Balance color: black Quantity: 18 My building has channel balances and I want to change to these ultra lift hybrids. This request is a continuation of D37586. My window sash size is 41-1/8w x 40/1/8" H. Visible glass height is 38-1/4". Sash weighs 45 lbs. I a ... (cont.)

Where can i buy this in Norway?

One of the bolts that slides into the rail is missing from the piece that is screwed into the door.

the slot that the strip slides into is 1//4" wide at the bottom of the door sweep

No names or markings on the roller. It is a tandem, adjustable roller. The wheels are metal. The wheel diameter is approx. 1 inch. Width is approx. 5/8 inch. The height is approx. 1 1/4 inches, but adjusts to 1 3/4 inches.

Hello, I previously ordered some balances and we are finding some broken sash guides. Can you please tell me if you have this replacement part?

One of my casement window lock handles has broken. I need to know which one to buy to replace it. I'm not sure where even to measure.

I'm looking for parts for several mastic windows. They look just like the pics on your page. I need a lock, a spring latch, and balances, maybe shoes also

Looking for a cover over the gray, like the image on the left

We just purchased a home that was built in 2004 and some of the windows are difficult to open and close. We thought that we might try replacing the hardware in one of them to see if that is the problem. I did not remove the old hardware as it is 15 degrees out and I am not sure that I could get it p ... (cont.)