Viewing all customer Discussions for:

Other

Rear drawer kitchen slider

My old cottage windows have this pile in between each sliding sash. They are supposed to be glued to the frame. Time has work then down. Any recommendations?

I have several windows that may have been made by Capital. They are approx. 15 to 18 years old and the double hung tilt window shoe requires replacement on a number of the windows. I hope you have a part number so I can order replacements from you. Thanks for your help - Fred Fink ... (cont.)

I have a Slide Right self-closing screen door and I need the latch assembly.

I need one of these

Hello, I need two of these sash balances for the right side of 2 different windows. Is this the only picture you need to identify the part or do I need to take it out and see if there are numbers on the back of it? Please help. Thanks so much! Charlie U8 11L 12-87

Hello, The rollers on my 10' Cascade sliding glass door have worn out. I called them, and they sent me to you. Can you direct me to the proper rollers and where to buy them please? Thank you. Tim

What part number should i order for a tilt latch and seal replacement? American craftsman 8501e 8500 series window Thank you

Looking for possible replacement parts for old 1950? Windows channel is 53" long. Each double hung has there own channels. Channel is 5/8" wide with interior spring. Not sure what it's called.

I'm looking for these swivel corner keys and also a couple on the latches. As you can see from the photo that the key on upper right is missing the downward part of it, the left one is ok. The lower right latch has the same problem, it's there it's just broken off. The other issue in findings these ... (cont.)

I need to identify and replace this window part please.

hi. it's 2 philips screws, 4 inches apart, holding the interior door handle. it's 2 philips, 3.75 inches apart on latch door plate (fig. 948). the mechanism turning the latch from the interior is broken best mike

I have two windows that need replacement balances please Window is a single slide up sash by Milgard Window weighs 17 pounds The metal Balancer is ½ inch wide The metal balance is 20 and 11/16 inches long The lower show is 1 inch wide Pictures attached My concern is the metal hook in ... (cont.)

4"×1/2 3 1/4 inside but 4" outside. 3 1/4 X1/2

The window channels are 29 and 1/2" long. The window blocks are 1" by 1.5". The channel has S shaped spring hanger at top. Need two replacements

I wasn't able to include another picture, due to your limit of 5, but in between the panes, it said "VIKING TEMPSEAL A.L.I. V.1.-1 CLASS A" All of the other numbers I captured are in the pictures.

Unknown window manufacturer. I need to replace these parts on both sides of my window but don't know wheee to get them

Broken and missing window crank. would love to find a replacement as the customer does not want to replace the entire window.

Hello I'm looking for replacements for drawer guide boots that have broken. They are pictured and inside dimensions are 1" high by 2.5 inches long.

Do you have these. I really need the holes to match up. I'm redoing all the hardware