Viewing all customer Discussions for:

Other

I am looking to replace 14 of my window locks. They are over 26 years old and the push piece is breaking on most of my windows.The measurement from install screw to screw is 2-1/4" and the distance from the install screw to end is 1/2"Let me know if you need more information.Thank you in advance,Car ... (cont.)

One of the plastic notches that holds the bottom roller (wheel) in place is broken. The other roller does not attach to the notch properly. Not sure if there's a way to replace just the wheel assembly or if the entire screen door needs to go, unless you can provide a way to reinstall the plastic ass ... (cont.)

Hi there!Take a look at our 26-122 and see if our dimensions match up to your original hardware. This looks to be an off-white color, but it's hard to say since lighting plays a big factor.

I am looking to purchase 4 Silverlie screens Model 2034 Casement (2) Model 4236 Glider (2)

M 6 lb. on boots Plastic clips just broke apart and pieces caused jamming issues and the boys just forced window up and down, breaking the shoes. I need 2 of each. There are no bars alongside, thinking the shoes are part S161-06 but don't take my word for it.

Greetings. I would like to replace the 2 cranks on my front bay casement windows. I was not able to find any identifying markings. Hopefully you could help. The measurements on the window itself are 16.5inch by 55.5inch

Do you carry anything like this weather stripping? Sliding screen door 36x80 Length of weather strip 80" Total width of weather strip 1" Width of channel (outside-outside) .5"

the outside perimeter measures 2"x 7/8" the gap between the bottom prongs is 1/4"

Do you sell the top window latches that lock and hold up the top window on double hung windows (see attached photos)?

These are pictures of slider wheels for one of my customers. They do not adjust and one of the screw flips are broken.

there are no hardware stores in my area that carry this roller. This roller has a flange on the sides that slide in to the bottom rail

Please see my picture and advise.

Bottom rear drawer guides to a nightstand from Ashley furniture purchased w-years ago

Hi! We have several windows that need new balances. Would the 351 model work to replace our old ones? The size is 25". These are Nuprime brand windowsIf yes, do you have these in stock? Also, all of these windows have only one channel balance on the left side. Was there supposed to be one on each si ... (cont.)

Hello, Based on the part number on the existing balancer, I assume it is a 31" I have a picture but it was measured with the bottom shoe on. Would this be a 31" 380? Regards, Jon

How do I determine sash weight? I could not find any stamp from my sash. Thanks, Sonny

I have purchased those in the past the lock part works for the front of the window but to actually lock it in place that little piece is not wide enough. Do you have anything closer to these dimensions? The lock latch is 2" from hole to hole and 1 and 7/8' wide.

I'm looking to order 4 of the above parts for my Hayfield H201 window. They where manufactured in 2004. I believe this is called a quick tilt mechanism. They normally will slide up with the window and hold it in the up position.

There is a GU and arrow like symbol on one of the arms

Door is about 30 years old code pen-1 spec SGD-A2/S617