Viewing all customer Discussions for:

Other

Hi there. I'm looking for the posts and the latches that are pictured. I photographed the good ones, not the broken ones. Not sure what window manufacturer. Possibly Andersen or Sierra Pacific.

Hello, Above photo is for a single pane sliding window maybe from the 70's. Do you have something to replace the avove as we would need 4 of these? Thank you.

My upper windows slam down when unlocked. Not sure what I need to repair them. See attached pics. Plastic says certainteed and metal "tension" ring says 334. I need to repair 4 windows, can you forward part numbers needed?

Hi we have a 27" balance, the stamped numbers/letters are 26 5 LT CMC 2 and it's a 1/2 wide. We are needing 8 total ( our home is 18yrs old, and some are really difficult to open/close for my wife. Hope the photos help. Thanks Dan

Need seals for top and bottom and piles for the rest. United window 4800 dh

replacement roller needed each roller is fasten with two screws one ear is broken off body of chasy is 4 5/8 wide and 1 3/16 hight the screws holes = center to center 5 3/4 wide pleas no adjuster on this i an find.

I don't know if I have to have this on the frame that I have or is it important to have please advise me I think not that important unless I need to remove the wheel in one piece or I have to somehow get that spring part of the wheel otherwise one I have in my hand...if you have a replacement for it ... (cont.)

I would like to replace the PADO hardware on this Andersen Door Circa 1994-1995. The door has an ID# ending in 297.Thanks for the help!Lisa

C-1040-9B need handle and operator please advice

There is a clip that glides across a J channel that is broken. It attaches to the bottom of the window and glides on the J channel. Window from the inside hinges from the left and the two locking handles are on the right.

Hi there,Just finishing up some remodeling work at home, workers miss placed the bottom rails. The lenght is 58 3/4 inches, need your help selecting the right rail profile for the hardware shown in the attached pictures.Your help will be highly appreciated. More than welcome to place an order by pho ... (cont.)

Hello, I've been looking for this part for a while without luck. Can you please help me identify this part and possibly purchase it from your store? Thank you.I believe it is American Craftsman Window. I need left and right. Thank you!John

NEED TO FIND ONE OF THESE LATCHES

Looking for replacement for Truth window controller,the only marking I can find is on the back Date 03/30/09 and I think a time 06:33ANot sure if they come in left & right? if so need bothThanks Gus

I have a broken handle on my sliding door. It has the numbers SGDH-3-A, with the number 2 below, inside the mounting bracket. Do you have a replacement bracket or handle assembly?

I am searching for a replacement locking handle for my sliding glass door. The door was I stalled new 17 years ago when I purchased my townhome. The handle has broken in two places - it has had normal use and I couldn't tell you how it broke. Anyway I have called and talked to the contractor who bui ... (cont.)

Ik wil graag zelf deze foto

The distance between the mounting screws is 8 3/4 inches on center. The distance between the handle hole and lock hole is 3 1/2 on center. Need new handle and lock that fit.

I went to Home Depot as well as Lowe's and I couldn't find the item.. is this model still on your catalog???

It has an ink marking 29 3 HL CALDWELL It is 29 inches long The metal channel is 11/16 wide The bottom has a plastic piece that is 1 1/16 long