Viewing all customer Discussions for:

Other

Furniture traditions dresser pull oak wood in middle brass pull 4 1/2 " Need a few replacement pulls

Hello I have a window and the balancers are not there. Can you assist with the one? This is a single hung window and it was the modern balancer in there from what I can tell by the other windows in the house

I'm working with SIL 1200 vinyl double hung grid windows. (I'm not sure if that means anything) It's for a apartment complex, and they have various size windows, all the same brand and style though. These are 2 of the different style deer I'm working with. I was wondering what replacement feet you ... (cont.)

I have Semco casement windows that are about 20 years old. They are in pretty good shape but I'm in the process of refinishing a number of them and need to replace some components. Can you tell me based on these images what parts I'll need? Thanks, Remig

Looking for this sash lock on white

This pivot bar is from a double hung vinyl window with tilt sashes. They are side-mounted, but there is also a screw on the bottom of the sash that might also mount a replacement. The screw is 1 3/4" from the edge of the window. The pivot bar fits into grooves in the sash that are 1/4" x 1/4". I c ... (cont.)

Hello I need to replaced my weather stripe on my casement windows pella 800 or 801cc

Hi, hoping you can help. I have a sliding door from the condo built in 1978. The handle is broken and missing, and the entire mechanism is broken. the dimensions of the interior trim is 7 1/4 by 7/8". Do you have anything that would fit? Thanks.

I have 2 Anderson windows that need parts. 1 awning will not crack open or close (the gears are not grabbing). 1 a casement that the handle broke completing off. If you look at the window from the inside it is on the right. Can you tell what I need and if you have them? Thanks

We are needed to order comparable parts that will work in place of these. We do need right & left hand operators. We are trying to order some additional parts to keep on hand for future repairs. Contact Marlin to discuss.

Jel-n-330

There is a slight difference between your part S795-28 and my original channel balance. This difference means I can't use the additional 1-1/4" T-Lock balance shoe15-195 with my existing balances. Do you have a better fitting balance shoe?

it's sort of a retainer that keeps the window sliding vertically

When opening the door from the inside the door handle IMG 3973 pulled out IMG 3969, outside door knob as shown in IMG 3970. The number we could find was on the door: 1 2059696043 132

I need to replace a balance with the lettering 22C FM5 CMC 34. I have no idea what all the numbers mean.

Need 4 of these. They open vertically opening windows. right on the ocean so very corroded. looks to be 3 screws on right and 2 on left.

Looking for 4 of these to replace.

Hello, The window balances are 40" long. Please let me know if you can identify them and part numbers to order (3×) sets. Thanks

Part #. 23.03.01.202. Aluminum right hand 13.5 inch arm

Good afternoon.I hope you can help me.Our glass door handle broke and we need a replacement It locks from the inside and it is polished brass colored.Thanks,John