Viewing all customer Discussions for:

Other

I'm looking for replacement for 7073B R. I also need the left hand version. I've read the blog posts, and it seems like 39-094 is a good bet, with the track mounted under window casing. But, the arm is much shorter than the 11 inch arm on the original 7073B arm which is 9.5 inches. Is that differ ... (cont.)

Hi... I found your site because I needed a couple crank handles. When I went to open the window and I realized it was rusted out and the top hinge that keeps the top corner of the window and place fell off and broke (see pictures 1 and 2). Can you please tell me what part I need to replace it?If you ... (cont.)

Need two roller inserts for my mirrored closet door. Insert measurements:roller 1 3/4" diameter, w 1 5/8", h 2', d 1/2"The roller has HC Corp on it.Thank you,Ed

19 2 Caldwell 1/2x 9/16x 20' LG.

Hi, Please see attached photos. Do you have the plastic trim shown? It fits inside a channel of the metal frame and it's for holding the screen (installed outside the broken fin) in place. Thank you for your help!

Measurement 35" length Width = 9/16" Stamp on balance = 3430

Can you help Me complete a replacement window job? The installer left out the lower vent plugs. Thanks, Andy

Replacing the coil balances for a 23 year old bathroom window. The coil is 1/2" wide and is stamped with 64C. From your coil replacement page it looks like S190. Can you tell me which one I need?

We are looking to replace these pivot shoes. They are designed for interchangeable inserts, but the replacement doesn't need to. It just needs to work with our window.

I have a bifold mirror door closet heavy one and it has corner block pivot made by ACME US Patent Number 4644992. I am not able to fid this part. Any advise will be appreciated. Thank you Michael

Hello, I am looking for 2 villa soleil nightstand hardware that was broken by my contractor that painted my home. I need an answer quickly if you carry and how much each. He will be stopping by tomorrow to look at what is staff damaged. thank you, laurie dickerson

Length of channel 25 11/16 In case you can't read stamped identifier, parallel to channel is 25 4 rn, perpendicular to channel between 4 and rn is 3.s.i. Thanks for your help.

We are in need of window repair parts. Attached is a picture of the window with the pivot lock shoe that is broken. Are you able to advise what item(s) we may need to repair this and the parts we need to order.

Top slider/roller broken off and missing. Top of door mirror is loose, flops around. It's from a Stanley/Monarch Safety Mirror. The "hotline" phone number now goes to a different business. Might be 40+ years old. See photo of label.

Hi, I need to order rollers for a sliding glass door and need some help ordering the right part.

Good afternoon, I was hoping you could help me identify a proper replacement for this glass door slider. On the wheel it reads Saunders Engineering. Is this something you carry?

Hi, I'm looking for a Mepla 9M 348.258.00.32 hinge replacement. The hole to hole measurement is 3/4". Do you have this or a similar hinge? Thank you, Midori

Looking for the strike plate the latch hooks onto

Roller says SYRACUSE N. W Not sure on the W it is where the roller is broken Measures 2 1/4 inches long not counting the part of the roller that sticks out Measures 1 3/8 tall not counting the roller and the end part that sticks up Nylon wheel is 1 1/2 inches

On 1 of my casement windows the metal piece that attaches to the bottom corner of the window and slides along the metal runner on the frame has rusted and become detached from the window. What replacement part would you recommend? My window measures 26"w x 45"h. The metal runner on the frame is 10" ... (cont.)