Viewing all customer Discussions for:

Other

Need help finding this keynetic handle

These window balances are both damaged and have been removed from our window. I am not sure of the window manufacturer, however the balances seem to be fairly universal. They are both marked with "26 4 B.S.I. PM". The metal part measures 27" long and ½" width. I am looking for suitable replacements. ... (cont.)

no identifying marks on dresser pull. color is dark brass

Do you have this part for my windows?

I just bought a house - the shower guides are broken. There are 2 - they Clíp into the metal frame on the bottom and keep doors from wiggling

Can you tell me wjat part to order

I need to order part 83115 and a latch cover that matches attached photo pls Thanks very much

I need two channel balances of the kind shown in the photos with a 30 inch rail and 4 with a 27 inch rail. There are no identification marks on them. I do not know sash weight ( they are at a rental but could go over and weigh sashes if necessary. Let me know thanks Mitch

Metal channel is 27" long, 1/2" wide. Marked 26-4 K. No marking on the plastic parts on the ends. Those are the parts I am unsure of.

This is a Papaiz handle but I can't find a model number, do you know of a model number or a replacement model? Thanks for your time.

Hope you can help by the pictures provided. Thank you.

Hi. I need help identifying the proper guide for my 1985 Viking aluminum non-tilt window. I could not seem to be able to find a good match for my part in the catalog online. Thanks. Paul

Hi, I need two springs for a Kinco non tilting window. The metal pins at the bottom of the spring catch in an Aluminium hook that screws onto the bottom of the sliding window. The window is double glazed and heavy but very difficult to remove. I would guess the weight at 40lbs.

My current balance is 28 inches please tell me the model I need

The handle seems to be stripped. It spins on the base without gripping onto it. In addition, the base cover comes right off, it's not attached as our other ones are.

I do not find the exact part on the website, I find similar. Does it need to be exact? Part numbers on the part 14. 6 Thank to let me know

Here are pics to our patio door handle. The inside part of the handle broke and we need to find the replacement. The measurement between the screws on the inside part of the door handle is 3/15/16 inches. If you need anything else, please let me know.Brenda/Robert

Dresser is approximately 50" x 38" Drawers are about 14.5" by 30.5" by 8.75" I am in need of all parts for the tracks on all 5 drawers If you need more exact measurements please let me know

2.75 x 11/16 wide x 1.375 H frame w/ 1.5" diameter wheel OA height 1.75 No adjustments. Screws in from bottom with two #8 screws, 2.25" on center.

Hi. Recently purchased and older house with Alenco non tilt windows. Saw your video, thank you very much cause I would never have figured it out. Did what you said and wired fine. I have a number of broken springs. I need 2 springs for the 33 1/2X 25 1/2 window And 2 springs for the 21 1/2 X 17 ... (cont.)