Viewing all customer Discussions for:

Other

I need a replacement double hook sliding door latch.

"Ronthor" has a number "4" at the front of the guide. About 14 1/2" long about 1 1/8" inside track, 1/2" deep. Hoping you can help me find replacement parts. You can see the front is stapled and the back is stapled.

Need help with (bubble seal) I order the pile weather stripping 58-099 which is 9/32x5/16 that fit in the Channel because it is 9/16.but the bubble seal I order was 3/16x5/16 that doesn't fit in the channel it is to small can you help me with the Right bubble seal the will fit only one I see that ... (cont.)

Broken tilt latch Dark beige 1 3/8 hole spacing Inside of the latch, there is a logo with the letters MDC inside the outline of Texas

2 1/2 inches from center of screw to center of screw. 26 year old window.

Attached are some pictures for a window I need help on parts. They are for a spiral balance and the metal rod is 29 inches in length and 3/8 inches in diameter. The bracket that the spiral balance fasteners to is 1 inch wide, 1 3/4 inches long and 3/8 inches thick. The locking mechanism is 2 3/4 inc ... (cont.)

Pat #5.139.29 Also an F o one and an E on the other. 75 is stamped on the tab on both

ANSI Z97-1-1984 SGCC 2909U CFG 3mm 16CFR ANSI Z97-1-2004 1/8 UA SGCC - 1702 AFC 5170

Need advise for recommended replacement cranks. Home was built in 1959 Thank you

Jack Lewis - need 2 replacement pieces for the photos attached and 2 mounting screws to go with the parts. Dimensional info as in photo: Wheel Dia. 1-1/2" Length is: 3-1/8"Height is: 1-9/16"Respectfully,Jack

Need help identifying these parts. The sticker on the window appears to be from the manufacturer. I was unable to decipher what the sticker meant other than glass. Any help would be appreciated. Also there seems to be no notch in the balance track to remove the shoe. Thanks in advance. Brian Warnock ... (cont.)

Holes are 5 1/2 inches apart over all length 91/4 inches

Hello, I'm looking to replace this with a new version of the same or a very similar part. Truth Model #45251 It also has this printed on it: 12152004 14:30 Thank you!

Replaced handle in balcony sliding door 8 years ago (prior one broke as well) and outside is completely rusty and inside broke already. VERY bad quality, avoid buying.

I found the numbers 07900 atamped into the arm, windows are old wood casement windows, cant find a manufacturers name on parts or frame. Theres a plastic guide that slots into the track and is screwed into the bottom of the actual window is whats broken. Hope you guys can help, thanks,Jason ... (cont.)

I am looking for all the parts for both right and left sides to open the side windows. The numbers I've found on the parts I can't see to find exactly 33177D I need the crank to open and close windows and the part that the latch grabs onto to lock it. I hope you can help because I've ordered parts t ... (cont.)

Can you please tell me which product # I need to order? Thanks

Hello, I wasn't exactly sure what to send you a photo of because we haven't taken anything apart yet and won't until we know the part is replaceable. We have a pair of Pella wood, interior sliding glass doors that we installed in the house we built over 30 years ago. The one we use the most is get ... (cont.)

Need to replace balances in window. Can't seem to locate replacement with matching stamp. Also wanted to know if variations in replacement balances may also work? I'm referring to slight variations in size (12 inch vs 11 inch), weight rating (4 vs 3), and top/bottom guide shapes. ... (cont.)

Stamped with UB 28C 29" long