Viewing all customer Discussions for:

Other

Trying to locate pivot bars for bottom sash window I was on your web side Looking at pictures but nothing looks like it will work I definitely need the notch out on the bottom hope you can help locate something that will work the window is a relia bit 5600

Need Grass6600 10 pieces

Looking for anderson crank out casement window replacement hardware.

This is a peach tree window the trim at the bottom is disintegrating and I need one crank. The window has 4 panels each measuring 20 inches wide.

Please help me to identify this part. I see 2830 and the hight without plactic part is 28 3/4", which I think consider 29". Both plastic pieces on the top and bottom have wings. The closes I found is S380 2830.

Hello,We have several windows that need the attached window part.We are hoping that you have it.Thanks,Nancy

This is located over the connection where the balancer is attached at the top of the window frame. I need 2 of these 14" long. I thought they were called sash stops but can't find anything that matches on any window site. The window are from 2003 and are single hung with a tilt sash. ... (cont.)

I need a replacement since this one no longer stays in the mechanism on the handle properly. It's for a Pella sliding glass door

I have a customer that needs some parts replaced in a large sliding window. The window is on a condo?. It has two sets of sliding storms?with a screen in the outside with a 2" gap between two large sliding glass panels on the inside. No idea of mfg. All the glass is a single pane. I have two par ... (cont.)

I need to replace channel balance for my pull up window which it can not stay up anymore. The identifier on the metal channel is: 21 2 GT CMC 2 and the other one is: 21 2 D1 CMC 4. The length of the metal channel is 22 inch, and the width is 9/16". I found a similar match on your website which is ... (cont.)

No markings, flat ?" wheel, 2" tall(?)

Hello A few months ago I bought part # S750-24 (24" Series 750 Channel Balance option: 23HD). I tried looking up this part number and can not find. Could you tell me if I can get this product or something that would be about the same. I thank you for your help.

I need a right-hand operator for a Pella casement window

Can you please tell me what this piece is called and if you sell it. As you can see in one picture we have the piece and in the other we don't. We can't find this in your website. Thanks!!!

Hello, I have some replacement windows with broken tilt feet and possibly balances. Which foot is needed? Thanks Matt

This window is from the 50's and has metal jambs that have springs behind them. The screw cups that hold and adjust the track tension slide past the jamb into the hole some times.. What type of windows are these and what is the screw cup part called as I am just making that name up. ... (cont.)

Storm door manufacturer and serial number is included. I am hoping to find a replacement handle. Thank you.Bob

Identifying numbers printed on the unit: 32-3 FA2 CMC 19The metal channel is 33" long, the back of the channel is 1/2" wide, the open side of the channel's slot is 9/16"One side of the window is also missing the little clip that pops out to catch the channel balance so that it can be removed. Fortun ... (cont.)

Good evening, Please let me know if you have this product in stock? I would like to but 16 of them? Thank you

One of these plastic support brackets is missing and I'm trying to replace it. The bar that it fits is about 3/8" wide and 1 1/8" tall. Tried searching all over but this doesn't seem to be a common drawer type. Would love any tips!