Viewing all customer Discussions for:

Other

Hello, I am looking to replace some of the window sashes in my home and was hoping to identify the correct part before ordering. The length of the metal channel is 35". From what I measured, the parts listed on the 35" SERIES 385 CHANNEL BALANCE (S385-35) seem to measure the closest with the preci ... (cont.)

Channel is stamped 24B. Need 2 of 12 and 4 of 24 and 6 mounting clips(metal)

I need a replacement window lock. It measures 4 1/2 inches long. Can you tell me the part I need Thank you

the latch broke on this door handle, it would be great if we didn't have to replace the whole handle. Thoughts? Thanks, jon

Block for serious# 500_27

I have 10 wooden sash windows installed around 1968. Although 50 years old, they are good windows. I have been unable to locate any name or other identifying information on them. One photo is an overview of this type of window. They do not have weights for counter balance, but instead have sp ... (cont.)

We have MI Windows BB740 series aluminum single-hung windows. I'm trying to fine the part number for the coil balance shoe. Windows purchased in 2009.

Can you tell me which one I need to order from you guys. Thanks Randy

HelloI have 5 of my Craftline 93-1 or 93- b windows giving me problems. One window is inoperable as what I call the slide portion is broken. This occurred after crank was reset in place. It turns out that the crank's operation is undermined by the stop for the arm or hinges is not performing as it i ... (cont.)

Hi this window is mi 3500 and it won't stay open so I will need single coil balance and shoe.Thank you.

From original windows installed by the builder, 29 inches long end to end. Windows say series 710 sh, Aama / nwwda 101 / is 2-97 H-R40-48x24 rated in accordance with nfrc 100 765-001. Has BFS on the handles.

I need the bulb seal for the bottom of an MI S-4300 single hung window. I have attached pictures.

I need both right and left complete set. 17 inches long 3/8 inch number marking is 26 4 B.S.I 2006 build year from Karsten Manufacturing

Hello, I tried to identify my channel balances for non tilt window but nothing written on my old channel balances, the length I measure only the metal part is around 34". Attached is the pictures hope will help to identify the part. Please let me know if you need more information from me.Thank you.B ... (cont.)

Measured the metal channel 9/16" wide at 28" Balances read 2 6 15 Caldwell, will need both. The sliding window has 2 cracking plastic corners, can you provide part?

29" long, 1/2" wide it has 28C stamped on the metal, there is no other info on the metalI will be sending another e-mail for a second window.

On heavy aluminum sliding door. I last replaced them about 10 years ago.

WHAT IS THE REPLACEMENT PART # FOR THIS ANDERSON WINDOW PLEASE?

Plastic drawer glide sockets that are starting to break . Could use a set of 3 but two would do if that's all that's available. I included two different pics of the same sockets . Thank you for your help.

Looking for sliding door locking latch. Patriot # 2300-1061