Viewing all customer Discussions for:

Other

Hi, I need to replace these channel guides. Its hard to see in the pic but the number on it is 286 with backwards 'C' The metal portion of the piece measures 29". It is 1/2 inch wide Would you have a replacement for these? Thanks

Hi, was wondering if you sell the Pella storm door hardware shown in the photos or similar hardware? Thanks for your help. Regard David

Hi, Im looking for your help identify the window closer below . Thank you Benny

These are the glazing strips for an aluminum bay window in a 1964 house. The strips are half an inch wide and 3/16 in tall. They are about 18 and 1/2 in Long but I'm assuming I could cut them to length. These are a gray plastic material but it is very brittle at this point.

S350-27 I may have ordered the wrong part here. Can someone help me identify the correct balance?attached are photos of the balance I needThanksKen

I need to replace Anderson L and R cranks 55003 What should I order and do I need to order the handles separately. Thank You George

Not even sure what brand of door frame this is but I would like to replace the panel with the hinges. If that's possible.

See above trying to find correct roller for two sliding patio doors. Attached are photos of rollers. It looks like your part number 81-243 is similar and believe roller is 1 1/4 inches in diameter. Found one at Home Depot but body of roller was just a bit too wide and grove on side of body was too n ... (cont.)

These are the numbers stamped into side of windows Mar 22 2007 908063. 202 0322 SUCL LOWE4V 322. (window 1) Mar 22 2007 908063. 019 0962 2UCT LOWE 352 (window 2) Mar 22 2007 908063. 004 0341 SUCL LOWE4V 341 (window 3) Are you able to supply the correct balance for these windows ? Thanks Austin ... (cont.)

Piece is 23" long. I am also missing the metal piece at the top of the window which tilts out with flat head screwdriver

I am representing a seller who would like to replace the roller wheels on four separate sliding doors (two sets per door). It could be that this roller dates back to the original construction of the townhome in 1967-1968. "Syracuse, N.Y." is stampled on the side of the plastic wheel.I would like to ... (cont.)

34" long

Hello, I'm looking to purchase the inner workings (locking) parts of this sliding glass door. The handle functions correctly but the locking mechanism is too worn to stay locked when it is closed. Thanks, v/r, Nick

I need to replace my channel balance, top sash guide, and take out clips. I have more picture. The channel marking is "32 5 KW CMC 11". The channel is measured at 33" long, not include the two plastic ends. I also need to purchase 4 top sash guides and some takeout clips.

Hi I purchase a mortise lock a while ago. When the handyman tried to put it in place, he realize that the lock was not the same size as the one he took out. I looked at the patent number on the old one, Im trying to see if you guys had something close to it. The pictures I hope can explain whats ... (cont.)

I have problem to find this glazing vinyl Model and size please help

Which item # do I need for replacement side balances on a Jordan 2820 window? S390-29? Also if ordered does it come with both sides or just the spring load side?

Hi I purchased these before from you.

I am replacing another set of window spiral balancers on a smaller window. The tip is up inside the tube on both so I cannot get a picture. Both look to be faded out. The measurements are: 17" long, 3/8" wide, and the sash weighs 10.8lbs.

Window unknown , no markings Pivot shoe has dimensions 1/2" by 1 1/4" wide by 1 3/8" tall. ( without spring) Need both R and L sets. Springs OK but both shoes themselves are broken. Can you identify? and supply?