Viewing all customer Discussions for:

Other

I need to purchase two sets of tilt pins for my windows. They are two inches in length and look like these pictures. Believe it or not but we had someone living in our upstairs area and when they moved out, I discovered that the pins from two of my windows were gone! Did not realize that there were ... (cont.)

Looking for: cb6400 non tilt window balancer. Currently have one with stamp number 54 52 (see attached) My current channel is 1 3/16" X 1 3/16" Need 8 of these. Thank you Amber

Attached is a picture of my HURD window crank. The Sash Keeper was missing when we moved in, and the crank works but doesn't stop once the window gets nearly seated like the other windows do. What would I need to order to fix the issues (besides the Sash Keeper)? I sent a picture of the other side w ... (cont.)

We are looking for a replacement part for the weather stripping for a Pella patio doors. Doors are original to house and approximately 30 years old or older. It looks like it goes over a 5/8 piece of trim. Any help you can provide would be greatly appreciated.

I am looking for a replacement part for my Win-Dor 7000 Sliding glass door weep hole/channel cover. I'm attaching several pictures of the original part. thank you.

need help identifying replacement.

My painters broke these three cranks. The windows operate properly but I need to replace the outside broken parts.

Hello, I am looking for replacement parts to repair windows so that they stay open. I have attached 5 pictures to this email and will send a second email with 5 additional pictures. Steven

Trying to locate pivot bars for bottom sash window I was on your web side Looking at pictures but nothing looks like it will work I definitely need the notch out on the bottom hope you can help locate something that will work the window is a relia bit 5600

Need Grass6600 10 pieces

Looking for anderson crank out casement window replacement hardware.

This is a peach tree window the trim at the bottom is disintegrating and I need one crank. The window has 4 panels each measuring 20 inches wide.

Please help me to identify this part. I see 2830 and the hight without plactic part is 28 3/4", which I think consider 29". Both plastic pieces on the top and bottom have wings. The closes I found is S380 2830.

Hello,We have several windows that need the attached window part.We are hoping that you have it.Thanks,Nancy

This is located over the connection where the balancer is attached at the top of the window frame. I need 2 of these 14" long. I thought they were called sash stops but can't find anything that matches on any window site. The window are from 2003 and are single hung with a tilt sash. ... (cont.)

I need a replacement since this one no longer stays in the mechanism on the handle properly. It's for a Pella sliding glass door

I have a customer that needs some parts replaced in a large sliding window. The window is on a condo?. It has two sets of sliding storms?with a screen in the outside with a 2" gap between two large sliding glass panels on the inside. No idea of mfg. All the glass is a single pane. I have two par ... (cont.)

I need to replace channel balance for my pull up window which it can not stay up anymore. The identifier on the metal channel is: 21 2 GT CMC 2 and the other one is: 21 2 D1 CMC 4. The length of the metal channel is 22 inch, and the width is 9/16". I found a similar match on your website which is ... (cont.)

No markings, flat ?" wheel, 2" tall(?)

Hello A few months ago I bought part # S750-24 (24" Series 750 Channel Balance option: 23HD). I tried looking up this part number and can not find. Could you tell me if I can get this product or something that would be about the same. I thank you for your help.