Viewing all customer Discussions for:

Other

Is this product available it is 1/2" wide with 9/16" legs?

looking for wooden storm window lock. locks window in storm door.

I AM TRYING TO MATCH SH WINDOW LATCHES, YOU HAVE SEVERAL ON YOUR SITE THAT LOOK LIKE IT, BUT I'M NOT SURE WHICH ONE IS CORRECT. 26-243 AND 244, 26-390 AND 391, 26-393, 26-393B, 26-419 AND 420. THE LATCH I HAVE HAS A #8 UNDER THE R OR L, THEN A #98 ON THE BOTTOM SIDE OF IT.

Hi,I'm searching for some plastic sliding guides for single hung aluminum windows (circa 1982, unknown brand).They are approximately L 1/2" x W 3/8" x D 5/16" (according to the used sample in the pictures below) and each window carries 4 (2 on each side).Please let me know if it's something you have ... (cont.)

Cole Sewell Door Registration number 06199890310 286 I need 2 sets of pins and bushing

26 5 AP CALDWELL Printed on the face. Channel is 26" long by 1/2" Lower end measues 1 1/16". Part in window measures 1 7/16" by 5/8" by 21/32". Window weight is 24 pounds.I need 2 balances and, probably should replace the window guide piece.Thanks. Richard

Hello, I need 16 balance tops for windows a friend ask me to repair. I can't find any markings or numbers on the windows.

I need balances at 28" long to supports wood sah with attached storm panels weiging about 40-45 lbs The plastic/steel reinforced balances that we removed were 9/16" dia Please advise. They need to be heavy duty.

cracked case

Looking for a replacement crank. Local big box stores don't have a match. House was built in 1964 and I suspect this is original

I am looking to identify the roller attached. I have the screen door name tag attached as well.

Hello, The latch for a carefree window screen is broken. I there a replacement for this available?

Hi,I need to replace this wi Dow crank as it's stripped.Inside the handle is the following:U.S. PAT4.083.264CAR.PAT. 197945012They are in a dark brown color.Do you sell these? If so, I need to order two.Thank you!Paula

I have (18) of the 2030 and (24) of the 2020. The aluminum bar on both sets are 21 inches long. The window manufacture is Alcoa.

We need the seals, lift assist, and guides for 36"x36" double hung window (Louisiana Pacific). We have the wood frame In the wall and both sashes and that is all. It was disassembled to put a stove pipe through years ago, and the parts are not to be found. We hope you can help us, thank you and ple ... (cont.)

I need to replace 2 different door sweeps. There are no names, numbers or identification on either door. The house is 25 yrs old. All the windows are Pella windows.

The coil balance on my window appears to have broken. Not sure of the make of window

Hello! I saw a very helpful Swisco video about replacing this part. I have an awning window in my bathroom that will not close. When I would turn the crank, nothing would happen. It's difficult to determine what size dual arm crank I need to use. Also, when I took out the screen, I could see that ma ... (cont.)

I have a Charlie bar installed but the black saddle/socket bracket is broken and I would like to replace it. See photo. Where can I purchase this part in my location?

I am trying to find parts for a customer of mine. The one photo shows top mechanism . I will also need bottom balance lockThank YouJohn