Viewing all customer Discussions for:

Other

The side glides appear to be broken on the sides of the window The widow is 34" wide by 29 1/2" Length. That is one section of the double hung.

Stamped made in Autria Also has the following numbre on it198.660-01.22 No actual brand name, but it looks like a blum

Have multiple old wood windows that need replacement balances. These are old spring type that hang from the top and pull the window up.

Need replacement roller for Anderson sliding door

Need replacement plastic two hole spring clips and possibly springs

11600-17 11600A-3

Trying to match door roller for an Alcan 6PD sliding door. Single nylon roller but wheel assembly appears to be pinned or riveted in place. Are any of your rollers pinned in place S opposed to screwed in place? I would feel better about removing it if I knew I could locate the proper replacement ass ... (cont.)

it's the part that slides along the track thus allowing you to open and close the doors.

Need replacement oarts

I am trying to replace the damaged window beading on the windows of our modular home. Five windows. The beading is approx 30" tall and 35" wide.

The pictures are a coil and shoe from a 12 -15 year old Owens Corning double hung window. I need to order replacement parts Thanks

looking to replace the entire part for double hung window

I took this out of my window. There is the number "4" printed on the side of each metal strip. I am not sure if I can simply buy a full replacement or I need to buy several of the individual pieces. Thanks for your HELP!!

Do you carry this model? The 6 mounting screws are inline. Longest arm is 10" between pivot points. %" long hole in window for crank assembly. 1/2 high. Thanks. J

Top latch Bolt broken

the original balances installed have the tabs or wings on top clip. One set was replaced with balance with no tabs. The window operates like new. Would the tabs cause a drag on the window if the windows does not call for these tabs? the clients say the windows have always been a struggle to open an ... (cont.)

Do you have this or can you order it. It may be DH-222 or PDH 550, I'm not sure. Pete

My window is missing these locks they are approx 1" wide by 2 7/8"

I am looking to replace this patio door lock and need to know from where I can purchase.

This was taken off a piece of wood that attaches by putting the track over it and secured by several screws from the side thru the track, it looks like it matches your product. Will need to send you pics from parts on the doors .