Viewing all customer Discussions for:

Other

we have Newell cutain rods that we need ends for The number on it is 51543-5

I need a pair of channel balances (one window) per the photos shown.

see attached file for measurements,top left for business info.

I am looking for top and bottom pivot arms for Simonton casement windows. The black plastic "shoe" that slides in the track are broken off the metal plate at the ends. It looks like the plastic was molded right onto the metal shoe. The shoe is permanently riveted to the pivot arm. ... (cont.)

I am looking to repair a tilt window. I think I found 2 of the pieces I need on your site: https://www.swisco.com/Pin/pd/Tilt-Window-Replacement-Sash-Pivot-Bars/26-415 https://www.swisco.com/Vent-Latch/pd/Other-Replacement-Tilt-Window-Hardware/26-122 But I'm not sure which pivot shoe I need. I ... (cont.)

Window wont lock. One of these is missing and the one pictured seems defective.

I cannot find any decription from my existing roller . I need 2 pcs .Thanks .

Having a very difficult time raising and lowering all the way our custom sized wooden window. Believe I may need to just replace both units and am curious if you have a replacement product that could work for our purpose.

White vinyl screen door track.

I need to order these hinges to hang my glass closet doors

Replacement for a white Window crank

Shows as Made in Austria. Numbers shown on the backside are: 3 666.265.50.00 624.310 11.00 The T shaped part, separate from the hinge, shows as Made in W Germany and has number 317.933.55.00 The first photo above shows a good hinge mounted on the door.

Need a replacement for the receiving end of the sliding glass door lock. The piece was removed by previous owner to accommodate a doggie door. Picture 20200829_110422.jpg shows where the part was removed. Thank you.

Need a latch for this screen door, the gap from the latch to the wall seems larger than normal. The distance from the wall to the inside of the latch is 1 1/2 inches. Thanks!

Looking for a replacement crank for a few windows I have. This is an awning window and I have a right swing same style

I am looking for white vinyl jamb liners for 1988 vintage aluminum clad wood windows. I can't find any manufacturer name or numbers. I have 13 windows. The jamb liners are 3-3/8" wide excluding the small wings on the outside edges. The photos are of a liner that is 54-3/8" long at the long edge. Ten ... (cont.)

Hi Swisco Rep,I need your help to replace a screen door latch lock. I have uploaded 2 pictures of the current lock for your reference to identify the part I need to order for you.Thank you.Armondo

Latch for tilting bedroom window. 3 1/2 inches long x 1 inch wide and holes are 2 inch center

These are screen retainers that weathershield used in around 2001 on double hung windows. The number I've used is assembly 982108 from weathershield catalog #011025. I would like to order some but am having a difficult time locating them.ThanksDean

Need a replacement sash balancer