Viewing all customer Discussions for:

Other

For an Alside 2000 Vinyl replacement window This pivot bar may be stamped with the number: 12310 Any other numbers stamped on the part are unimportant - they are for the factory only.

Channel Balance looks like Series 380 with 19-005 top and 15-005 shoe but balance is stamped 28B. Am I looking at the wrong series.

Not sure if you can identify the part by these pictures but that is all I have at the moment.

Window sash swings in to clean. A nylon pivot pin locks the track in place so the sash can swing in to clean. The pin broke and needs replaced. Looked but can't find.

Trying to find a match for these pivot bars. Can't find any window maker info anywhere. There is a #1 on the old pivot bars. The shoes have a cast cam and a couple are broke. Any info you could provide would be much appreciated. Thanks

Hello,I am wondering if you can help me with a replacement handle. I believe the screws are 4in apart. This is a discontinued Rylock handle for a slider door That opens to the left. Any help would be appreciated.

30132 stamped on side hinge

Hello ! Looking for this type of double hook cassette, is that something you carry?

I am looking for a replacement crank for a Great Lakes Garden Window. Ply Gem suggested I contact Swisco. Please advise if you carry this part, the window was installed in 1990 and is in great shape. Thank you, Matt

Looking for this the holes are 3-15/16 I see you have a mortise but the lock is in a different place

This one says 7R

I need a replacement crank for a bathroom window. On the crank system is model truth with #31703 on one side of the crank and 31704 on other side.. measures 21 1/2 in width and opens approx 15 inches.. Approx 20 years old..

The mechanism keeps popping out so the handle won't engage when trying to lock the window shut. Truth #40538 appears on the vertically sliding brass metal plate. The interior white handle has lateral play. All other screws on the outside are secure. Perhaps just the inside part needs to be replaced ... (cont.)

Pin that is in the bottom of the window sash, that clips into the end of a spiral balance. Held in place with 2 sheet metal screws. About 2-1/4 inch long.

The metal piece is 27" long with the number 2690 30 on it. Looks like the Series 395, but needs a stronger stamp option.

Hi,We installed a new double pane window and the existing glazing bead is unusable. We have no manufacturing information on frame or hardware. Photos of the existing glazing bead are attached. Do you have any suggestions as a replacement for the existing glazing bead?Thank you,Keith ... (cont.)

looking for this

I am looking for two parts.1. I need a drop down draw pull for a Thomasville "Pagentry" open shelf book case.2. I need hinges for a Thomasvill "French Court" armoire part # of the armoire is 18239-01-010 or 17811-340 these numbers came from the delivery manifest these were purchased in 1 ... (cont.)

I have two windows which need to have the sash balances replaced. 1st window has numbers listed as: 26 4 CW CMC 10 and the pictures are for that one. 2nd window has numbers listed as 20 4 LV CMC 2. I had to put that window back together so didn't get pictures for it but the sash balance looks the e ... (cont.)

The pin is in the sash and is slotted in the rail. There may be 2 pins