Viewing all customer Discussions for:

Other

Hello, I am looking for a replacement of the channel balances on my Milgard windows. The lenghth is 33 inches. Thank you for your help. Thomas

I tried to identify what I have is of series 395 or 385 before making an order. It's 16'' long, with 1540 # imprint on it. Thanks.

I need to replace a rubber strip in a metal framed shower enclosure. The strip is in a slot in the metal in the door opening on the strike side, and keeps water from escaping between the door and frame. The existing rubber strip is gray and 3/4" wide, with a triangle shaped top that goes in the sl ... (cont.)

I am looking for a replacement for a single arm Truth window operator with R30842 listed on the arm. There is also a 308830 listed on the center of the base.

I need a track guide bottom 144" for mirror closet doors

I was hoping to be able to get a few six or seven of those bottom pieces that the lock fits in and how to go about putting them in.

We determined it's a 27 inch balancer. The metal part is 26 3/4 of an inch. You can see the pictures here

Swisco, I am following up on a cabinet hinge that I requested information on from you before. You suggest the model 32-349. This model is extremely close to what I need, but not exact. I have attached a photo of the hinge I need replaced to include a picture of the portion that mounts to the insi ... (cont.)

Hello, I have Certainteed double-hung windows, installed prior to 2004 (unsure when). The bottom sash of one window won't stay up, and when I removed the window I found that the coil spring has snapped on both sides. One picture shows the assembly I removed from the middle of the window on one sid ... (cont.)

Broken piece from back drawer. Don't know cabinet or track models. Was thinking 32-089 would work, but wondering if slot in RH bracket will be an issue since original doesn't have it?

I have an Alcoa window that Does not stay up, the bottom corner part broke so can not go into spiral balancer. And when I took the bottom window out and laid it against the wall it got knocked over fell onto the floor and cracked inside of the glass. Do you replace the whole bottom window that sli ... (cont.)

Mepla 698.253.50.01 plus. 348.253.52.00

Hi. Need replacement for zinc window pivot bars but not sure which one to order. Thanks.

I need 2 dozen of the small pieces of pile that stick top double hung vinyl window. I cleaned windows and if pad was not missing it came off because of their age.Can I purchase 36 of these please.

Picture of Anderson screen door wheel insert.

Dont know what type this is. Pictures are for left side. Lock is marked with Truth identifier. Want to replace the operator mechanisms on both sides. Thanks Tim

I would like to replace these MW sliding door handles. I found what I think is the correct handle on your website. Please advise.Thanks, David

These seals have a 3/8 inch kerf length into the window and the seal bends 90 degrees back toward the inside of window another 3/8 inch. A 7/16 inch leaf seal curves to the outside of the window connected to the kerf. These are 6 foot length windows. Thanks for checking.

Hello, Can you assist me with obtaining door pins and track for these late 60's-70's metal bi-fold doors please? There are two panels. each are appx 24" wide. Each panel will be installed separately for two seperate closets. Attached pictures for your reference. Please advise, need parts yesterda ... (cont.)

do you have sash balances for Anderson series 400 tilt wash windows double hung model tw 38/42 vinyl window