Viewing all customer Discussions for:

Other

I am looking for white vinyl jamb liners for 1988 vintage aluminum clad wood windows. I can't find any manufacturer name or numbers. I have 13 windows. The jamb liners are 3-3/8" wide excluding the small wings on the outside edges. The photos are of a liner that is 54-3/8" long at the long edge. Ten ... (cont.)

Hi Swisco Rep,I need your help to replace a screen door latch lock. I have uploaded 2 pictures of the current lock for your reference to identify the part I need to order for you.Thank you.Armondo

Latch for tilting bedroom window. 3 1/2 inches long x 1 inch wide and holes are 2 inch center

These are screen retainers that weathershield used in around 2001 on double hung windows. The number I've used is assembly 982108 from weathershield catalog #011025. I would like to order some but am having a difficult time locating them.ThanksDean

Need a replacement sash balancer

Patio door is basic white 6' - 80" installed in a modular home. My measurements are: 4" total length. 2" high, 1.25" wide, 1" wheel. My measurements don't match yours hopping you can tell correct part from pictures.

I need the steel bands and connectors possibly Marvin window For 2 windows 2 sets each

4.5 inch pulls . The dresser is by Thomasville

2340 J stamped I think it is your part S380? Please confirm.

Haven't done this before but our house is 25 yrs old and the balances are starting to fail. I removed the jamliner but not sure the part. They're semco windows and the balance shoe has the number q28tg. Thanks Josh.

Hello, I'm looking for the bolts for the locking mechanism for an awning-style window. There's no part number, but there's PAT NO. 3305971 on the lock. I only need the bolts, but will buy a kit if need be.

It's product ID 5500 S.O. 18620361.1 CCL# 440-H-046.03 MWHS 4 Silverline Windows 12002344228 Actual Size 71 5/8 x 79 3/4 SIL-N-9

I'm looking for the sashes (2). Mine are marked window balance 16-3 FT CMC 2. I also need the nylon feet on top and bottom to hold them in.

Caldwell Manufacturing 25 3 LR

I'm trying to find the locking mechanism for my glass patio door. I took the entire door handle/latch/ everything...apart so I hope I can figure out how to put it back together! Here are the markings on the glass I think (it is hard to read so this may not be 100% accurate):CTG TemperedSGCC 1804 1 ... (cont.)

This Drawer pull is for my 2004 Beaver Monaco RV. It measures 5 1/8" long. 3" center to center of mounting screws.

Each window has 2 of these. The windows are the same age. One just broke, so I assume the rest may break soon too. I like to order 12 of these pieces. These help the window to go up and down and stay up. They keep the spring in place.

Has the following markings "Entry Guard Truth" "L 31538A" "40753" on long arm "20810A" on short arm "U.S Pat. 4.241.541"

Hello I need a replacement for this block & tackle Channel ballast. It came from a double hung window manufactured by a company called "GRAHM ARCHITECTURAL" out of New YorkBallast has imprinted number on face of the aluminum P 39-3These double hung aluminum windows were installed in the early 9 ... (cont.)

1/2" I believe