Viewing all customer Discussions for:

Other

Hardware rusted and bar snapped off window. Pictures attached are of a good window. Had to manually close the broken window.

26-244 very similar. Same measurements

On the casement window, we are looking for the hardware located on the bottom as viewed from the exterior hinge right. Our piece is broken and the window will not close properly. The crank mechanism is fine.

NEED THE PLASTIC PIECE THAT THE DRAWER SLIDE GOES INTO.

Length 24"Markings: the number 2390 is stamped in a horizontal position, then the letters FG (horizontal) then the letters BSI in a vertical direction; then the number 34 afterward in a horizontal position. No other markings that I can find.Need help identifying so I can place an order.Thank you.Ken ... (cont.)

I have a double spring assembly from a Vinyl window. The springs are stamped LA 407 and SA 407. LA is the upper and SA the lower springs. The

I need new weather stripping for a Kolbe door. Here is a side profile picture.

Need 2 ea spring & pivot balance shoe assemblies. Measured 25 " from upper screw to top of shoe. Will also order pivot bars.Thanks in advance.Chuck

Please provide your part to replace this original Anderson window mechanismFront stamp c-9400-1 and back F-9400-8Thank you Elliot

This Milguard French patio door opens outward. To release the door, one pushes down the slider in the channel from above, as pictured, and lifts up on a similar slider in the channel from below. The sliders are moved pulling down/up using the pictures plastic insert(s). The bottoms one is broken ... (cont.)

Need to replace interior part only

The approximate measurements from left to right are 1/8"+, 1/4"(inside), 1/4"(outside), 3/8"(outside).Where could I get some new vinyl like this? Greg

Is there a way to replace the shoe on a series 775 or convert it to a new shoe? I have a few windows that use this balance and the shoes stay stuck at the bottom of the channel. Thank you Mark

None

I have a 29" channel balance with a UB 28D stamp, no other codes on the metal channel. Nothing to tell the weight I need. What channel balance do I need to order?

Hardware from an old (46 years) PPG K Herculite glass slider is worn. The brown catch has a gap on the edge and can no longer hold the door closed. The floor is sloped and the wood was added behind the catch to relieve some of the pressure from the sliding door pulling on the frame when locked. ... (cont.)

Sending pictures of our weatherstripping on our Wenco windows. They are about 25 yrs old , have been good windows but weatherstripping is falling apart hope you can help us out.William

It's white and plastic

I am looking to replacement the broken lock on my Jeld Wen single hung window. I have attached a photo of the lock. Thanks John

Hi I am fixing a closet door for a customer and she ordered a new track 23 - 243 gold, and 4- bottom track guides 23 - 215.. unfortunately the bottom track guides are not the same and it will not work I will include a picture of the guides that will work and maybe you can help me find the right part ... (cont.)