Viewing all customer Discussions for:

Other

AAMA/NWWDA 101/ I.S. 2-97 H-R25-44x72 vinyl double hung window. The pivot lock shoe broke at the top, where it attaches to the rivet.

I have several windows that need new side channel balancers. They are 1/2" wide. They are 37" without the plastic ends. The numbers on the metal say 37DS 44 BSI TT. Thank you.

Screen SR-195680 The screen is for a Jeld-Wen casement window. Jeld-Wen says it doesn't make the screens for its windows and cannot help me. I have attached two photos: one with the spring-type tab missing, and one with the tab in place. Thank you.

Do you sell a sliding glass door keyed lock handle for a 1 3/8" thick door

Hi! These balances are for Viking non-tilt vinyl windows approximately 25 years old. Marked "20 4 HP CALDWELL. I looked at your part identifier, and was pretty confident on the bottom shoe, but the top shoe looked a little different than anything else shown. What do you think?

One rod has TRUTH on it; the other one has 6403 on it. I'd like to know a part number and a price quote and delivery time. Thanks.Al

Hi I'd like to replace some broken pivot shoes. The dimensions are: depth: 1/2" width: 1 1/4" length: 2 1/2" They are for a blue tip spiral balance and should fit this pivot bar https://www.swisco.com/Pivot-Bar-3-1_16-inch/pd/Tilt-Window-Replacement-Sash-Pivot-Bars/26-226 Despite the length diffe ... (cont.)

I have white pile weatherstrip (9/32" x 9/32") that came attached (glued) to a plastic backing piece that slides into my window screen top edge. I'm attaching a few photos of the plastic backing piece to see if you sell a replacement part. It has cracked and is no longer usable. I need a replacement ... (cont.)

I want to replace these items with the proper replacements.

In the winter the door freezes and when we open the door this seal moves toward the far end of the door. Is there a way to keep that from happening?

Can you help me find the right parts to replace the balance shown in the picture please? The frame size is 31ins wide by 27 3/4ins high and is 1 1/4in thick The sash weighs 16.5Lbs.

Hello, I bought a home that was built in 1976. Every window is a casement window and the crank handles have R.O.W on them. The problem I'm having is the yellow plastic slide piece is deteriorating and causing closure issues. Thanks in advance.

I need a lip corner key for an extruded aluminum screen frame

I have 3 Pella entry doors that need new sweeps. They are the double kerf type and the kerfs are 5/8" apart. I see you have one with a 7/8" kerf spacing. Can I get the 5/8" spacing that I need? All doors are 36" wide.

Gears are stripped in the crank case. Hello Was wondering if you could help us find the right part to replace it? Unfortunately there's no markings or information on the window or crankcase This is a block window with crank case in bathroom This is a block window with crank case in bathroom. T ... (cont.)

The crank will push window out but not return. I bought Parts 39-083 and 39-114. Do you know how to repair the current part v taking the whole window apart?

Can you Identify this part for me?

Is this part available? The arm is 5 inches long, overall dimension is 4 3/4 inches , from the center top hole to the center bottom is 4 1/4 inches. . Body width is 5/8 inch . There is a screw hole in the center of the body to screw into the frame of the window on left side. Any help would be apprec ... (cont.)

These latches are from interior storm windows on a large set of iron entry doors. The pin that inserts into the door frame and holds the window closed has broken off on several of them. Any help would be amazing!

I mainly just need the part that is in the picture in my hand but if you must send the whole lock fitting that is ok, or if you have something like it that will work i would greatly appreciate it!