Viewing all customer Discussions for:

Other

Looking for a replacement for the left and right .

Dear Sir or Madam, I am trying to find the correct socket for my drawer, any help would be great. I have uploaded a pic, and it is tough to identify the correct socket as there seems to be a groove in my drawer that needs to slide into the socket. Thanks you

I am looking to replace this lock and carrier with new ones. Preferably I would like white ones. Can you advise which part would be a direct replacement?

Looking to match slide bolts, I will need some left some rights and Springs Brentwood vet

I have a balance from the 1980s . The solid metal tube is approx 3/8 inch wrapped with a spring diameter is 1/2 inch. The length is 27.5 inches. I need to order several .What sizes do I need?

The extra ones I have are in a swisco box but I have no part numbers

I need a replacement out door handle with round lock punch out. The patio door is white metal and for a park model trailer. Hole spacing is 3 15/16 and the door is 1 inch thick.

I would like to order for my American Craftsman casement Windows. It was suggested I attempt to locate a series number and/or take pictures. I have included some photos of the operator arms/hardware. I would like to order 2-left & 2 right operator arms.

Peachtree tilt window balance Stamp # 19 HD 20 inches long

Install America says this part, the lever that locks and unlocks the screens on our Slocum windows, is no longer available and sent me here to see if you can help find this part. Currently cannot get the part off the window, so took a pic of one that isn't broken and is installed.There is no visible ... (cont.)

the white plastic piece slides up&down, clicks into the track to keep on the track. I think this is a 30+ year old door so not sure whether to replace the entire part of just the white plastic portion that clicks into the track. No part # or serial number anyhwere I can see.

Custom order request- I need a pair of 32" Series 751 Channel Balances S751-32, each with a 15-197 locking terminal. The sash weighs 29 pounds, so I'm figuring the 31HD option. Can you please reply with a quote. Thank you.

Item 1. Two spring coils with plastic casing and screws x 10 sets ( ten pieces of 2 coils in plastic casing for 5 windows, each window takes two pieces) Item 2. Latches x 12 ( ordering 2 extra) Item 3: 2 pieces of 2 coil springs mounted in plastic with hardware and latches -2. Each side of the windo ... (cont.)

I am replacing the seal on my boat windows. Do you have something close to this?

Need replacement window balances L= 29" Widths and depth of channel is 5/8" Weight of window " 24 lbs Stamp on current balance is 29-4 Top and bottom attachments to balance shown in pictures

I have Milgard windows. Channel balance appears to be 27" long. Text says: "26 4 DW CMC 10"

Hello, I have one older Anderson window that needs both sash balances replaced. One sash has the markings 11600R-2 and B01 14#27 1-86. The other sash balance has the markings 11600-17 and B02 14#27 4-86. Can you please let me know if you have these in stock, what the price is and when they could be ... (cont.)

The door markings are Pella Insulshield A IGMAC P 3-05 I need door sweeps!

I would like to change out this sliding glass door handle so that we have an outdoor KEYED entry. This one does not have a keyed entry and we want to replace it with a keyed entry for increased security

The door has no markings or number, the rollers seem to be about 1 inch in diameter. Thanks for the help!