Viewing all customer Discussions for:

Other

Pivot slide pin for Harvey window

Looking for replacement locks for awning windows. One of these is a Marvin (not sure which). Could you identify these, installed around 1993. I need a set- left n right- of each. Do you carry these parts, how much would they cost? ThanksNick

Hello - My broken channel balance is inscribed with BSL 28300 (but the last zero looks like a backwards D). I suspect your comparable replacement part is Series 380 Channel Balances 1/2" x 29". Can you confirm? Thanks, Darec

Hello, Trying to find a replacement for the attached balancer. It says its a Calwell 20 3. Length of the metal is 535?? (21.06") which does NOT include the plastic parts. From my research of your website its either a 380 or 385, but I'd appreciate some professional confirmation! Please let me know ... (cont.)

I need 2 left balances and 2 right balances and 2 pivot bars. Each balancers have a 5 lb coil on the top and a 4 lb coil on the bottom.

I need not only this part but would like the whole assembly PAT 07867

Hello I have a no name brand bathroom casement window opens to the left .the crank operator gears are stripped out .only name I can find on the crank operator is by TRUTH made in the usa .dont know if you could help?

sliding glass door handle for gorell 500pd6068 also need handle for sliding screen door handle is plastic and locks. also note handle for sliding door is brass

I am also looking for the same thing LEGACY KEYED HANDLE SET, 3-15/16" (1-1/8" TO 2-1/2") Product Code: 82-086 work as the door handle ? it looks like the ones I already have. For the latch any help would go a long way. see below for a picture

The hardware on my Cole Sewell Cambridge Style door broke.. I need a standard handle and knob assembly replacement. I don't care what style.

Would you be able to provide a replacement lock part number for the above referenced patio door?

do you have this glazing in white available? Thanks Karen

looking for a harvey window pivot set

No brand or manufacturer markings on these casement windows nor in between the panes. This is from the frame of a casement window.

The right photo shows the spring assembly, it seems to be broken on one side, though it is hard to tell. When the doors are closed, the rollers press against the spring but won't stay closed. I purchased your part 23-130 Top slide guide which looked like the broken part, but clearly is different. ... (cont.)

Could you help me find a match to one of your Patio Door Rollers if you have it available. It has a single 1 1/4 inch roller, is about 1 1/8 inch tall and about 2 1/4 inches long. Has 2 dimples on the sides as shown in picture. I really enjoy using your great window screening products. Thank you, ... (cont.)

Looking for this pivot bar that bar that goes to a window with 3/8 spiral balances

I ordered 95-020 as a replacement for the screen corners. They looked they would work, but widths weren't listed. Unfortunately they are too wide. Do you sell narrower width corners. I have attached a picture of the old broken parts on the left with measurement. The 95-020 is on the right. Thank you ... (cont.)

Hi, I am looking to identify and purchase several Block and Tackle Balance parts for my sash windows (Milgard brand) Stamped length 20 Weight code 5 and Stamped length 30 Weight code 6

This seal was on my Yano cover. I need a replacement and don't know what kind it is