Viewing all customer Discussions for:

Other

slider at top of window to keep it tilting forward.

window series 2000 code mon-1 hsr 15 mst 6040 ans/aama 101-88 mst 6040

I need the black plastic clip that sides in the channel on the bottom of the window. It says Truth on the arm

Could you please let me know if you have this window screen corners as diagram enclosed

I NEED REPLACEMENT ROLLERS. THE LABEL SAYS SERIES 2000 SGD-C30 MST: 15280

Good morning,We would like to identify this spiral balance and pivot shoe, pleaseMeasurements:L 30" and L 34"Thickness 5/8"Color RedThank you Mike

Looking to replace the part that attaches to bottom of sash to lock and unlock balance.

I need the complete mechanism to replace the one that is not working. The # on the old one is 20755. Also need the handle that fits it. I am sending a picture to make sure I get the right one I also need 2 more handles to replace the ones on the mechanism that have been replaced but old handles do ... (cont.)

34" channel balancer metal only. Top guide extends 3/4" beyond metal channel

I need two lenghts ot magnetic metal door weatherstrip for an older Weathershield double entry door. One 73" and the other 78 1/2".

Look for part 7700B or what is the new part number.

This is for a window - one side holds the glass, the other side holds the screen.

I need to rehang closet doors that were removed quite awhile ago. Two rollers are intact, but the other two are missing. These are luann doors about 1-3/8" thick. The nylon rollers are 3/4" in diameter. Offset of the one pair I have in hand is 7/8" inside measurement, 1" outside to include the width ... (cont.)

Hi, Was wondering if I could get assistance identifying my old channel balances for non tilt windows and matching up with your channel balance part numbers, so I can purchase. My balances are 1/2" in width. Three out of the four images have identifiable part number labels. The image with three cha ... (cont.)

While washing this window, opening the lower sash, it came out of the slot, and I discovered this piece was broken. I removed it and am quite sure I can put a replacement piece in.Is there a replacement piece available?Thanks!Marie P.S. I previously sent this without the photo!

The markings on my balancer are 26-3 CA2 CMC 7. I ordered 2 new balancers that I thought would fit but upon closer inspection they are missing the winged top and bottom and now I can't get the window back in because the balancer is too deep and sticks out too far. Can you help me figure out the co ... (cont.)

I need to replace the glaze on all my windows. I could not find any identifying names, numbers, or markings. I also need help calculating how much I would need.

I would like to use the old coil which appears to be in very good condition; however when I look at your Product Code: 15-111 pivot shoe I'm not sure how I would attach the coil. As you can see this one has a screw attaching it to the old shoe. Will I need to buy both a new coil and shoe with the 15 ... (cont.)

What series do I need for my type of channel balance. I have a few different size windows. They have marking of : 16 2 28 3 28 4 28 2

from 1970 single pane double hung windows. Mfg not known. see photos