Viewing all customer Discussions for:

Other

This is a picture of the two balancers I took out of my tilt window.After measuring I came up with a 27 and1/2 inch tube and 28 and 1/2 spiral.The dimensions of the glass is 26 1/4 x 30 1/2 and weighs 18 lbs.The diameter of the tube is 3/8 inch.It also has a blue end which you should be able to see ... (cont.)

Marking on the window channel is 8 24:C The length of the metal piece is 25 1/16 " (Not including the plastic parts on the top and bottom.

Need all Hardware associated with this lock for two similar doors. Thank you in advance for any assistance you can be

I need to replace the 'string' balances for an Anderson window. The window looks like the one on your video with the split casing on the left side where the lower section can be removed to allow removal of the windows. The glass area for both the upper and lower window measures 28-3/8" wide by 1 ... (cont.)

I'm looking for a part from Cole sewell registration Number is Es478945

I ordered the patio sliding glass pulls it was #82-008 mine number is 12 inside pull and 13/23 pull outside it did not up with my door coud tou suggest a different hope you can help me out

Digital image of the Hanging rear drawers slide bracket is attached. I require a couple of them. Do you have drop-in replacements.

Misplaced the other channel the operator roller fits in. depress arm to detach.

Looking for the weatherstripping for Certainteed Double Hung Vinyl windows manufactured about early 2004 - I need to replace the strips along the bottom on at least two windows. Certainteed description is XT DH 36X48 WH FS NO GRIDS CL and XT TWDH 72X60 WH FS NO GRIDS CL.

I have a "The Forever Doors" storm door serial # B-162048 and need to replace the sweep on th ebottom

Porte coulissante. Rail au plancher. Inscrit sur roulette: SS bearing DWB-38

I have 4964 BSI balancers, need ones the same dimension but less poundage.

Hi, I have windows that come with spiral balance rods. You have them, but I cannot determine what size replacement to use. The one's in your catalog measure 28 and 29 inches. The replacement item measures 28.5 inches. Please advise

balance identification

We need 3 right clamps with the corresponding hooks in Pennsylvania prior to September 4. Can you help me?

Hi - I'm trying to locate replacements for a white, plastic sliding drawer spacer, labeled with #600.010.03.25 Thanks.

Top metal storm window guides that go inside to hold window and allow in to slide up and down.

DO YOU PROVIDE A TEMPLATE FOR THE HOLE PATTERNS OR DO YOU HAVE TO LAY IT OUT YOURSELF ?

I need this hinge by amerock where can I get it

The bracket is 7 and 1/2 inches long.