Viewing all customer Discussions for:

Other

am trying to find this tilt latch part i seen your companies response to some other posting thats how i can to ask you can your company help with either a replacment parts or to guide me to the correct company that made the part in question

Need to repair or replace this track. There are two sets of rollers...one pictured. They are riveted into the track. No idea which compsny made this.

I need 4 balances . Description: 1/2 inch wide 5/8 inch deep 30 inches long Pictures of ends included below:

Need some window lock keepers for a sweep lock. Sweep lock looks like your 90-025 window lock. Keeper holes are 1 inch apart. Keeper is 1 1/2" long, 7/8" tall and 7/16" wide. Thanks for your help.

Acme 4043-2 and 4043-1. ... bottom tab that fits in track is broken off of both of these pieces

Hi the part 26-351 that matches the measurements on web site were received (thank you) but they do not measure up in regards to either screw hole, the width or the length (see the pictures attached). Might you the part matches the measurements on your site as well as the measurements in the pictu ... (cont.)

says on bottom of tilt latch 5R and .075 down near end that retracts with it retracted says pat pending5,139,291 Latch is 2 7/8 inches long(main body) 3/4 inches wide

The first pic is of the "broken" part, which is missing the tab. The 2nd pic shows a "good" part with tab. Patent # on the part is 4926594. I need a quantity of 1. Kenn H

HI i am looking for a replacment roller for a patio door the make is Truth steel the model is 31761 is this any help i enclose photo mant thanks ciaran

I have Marshall windows that were installed in the early 90's.....quite a few have broken off and I want to replace them ASAP. The dealer I went through does not honor their " lifetime" warranty ,so I'm on my own! Don't really know what I'm doing,but was hoping for a little guidance from your knowle ... (cont.)

I have a busted crank case/cover for one of my window cranks. Where can I find a like kind and quality one?

Hi Can you help me find replacement screens or replacement parts for screens? I could probably do re-screening myself, but the plastic hardware is very brittle and has broken off on most of my customer's screens. I'd rather buy all new screens but if that is cost prohibitive then maybe I can ... (cont.)

I'm interested in a couple of the mesh rollers that you supply. I'm looking at item 75-068 & 75-008. Can you please confirm the concave wheel thickness of 75-008, is it the same as 75-068 which shows it as 3/32".

I am so thrilled to have found your site. I have searched high and low for drawer guides to replace my busted ones, which were busted by girl-overstuffing, and the fact that they are metal reinforced! Big, big bonus. Your site is very well organized and i was able to quickly find exactly what i nee ... (cont.)

Handle says "made in New Zealand"

My windows were bought in 1989 and the vinyl corners that hold the screen frames together on the screens are old and break easy. Which corners would fit my screens.?

Will this Anderesen Awning Operating Kit replace my existing broken one. The pivot arms are stamped F 7184A 11. The round bar attached to the window measures 6 15/16" long. This is a 24" high by 20" wide awning window.

Hi. Your website has been great to determine most of the parts I need to order, but I do have a problem that I need help with. Channel guide 2930, series 380 I believe. The problem: I can't tell what top sash part I need. The 3 or 4 that I have are all broken on the lower portion, hence no overall ... (cont.)

This part is off the side of a metal window. Please identify.

I need another order. I've attached pictures of the parts needed. The window measures 35 x 50. Can you let me know the cost?