Viewing all customer Discussions for:

Other

Hello, Please let me know if you have the following rollers or ones that are compatible. MBC 1116 See attached Thank you, (Suggested 81-282) All the measurements are correct. The holes on the top are different but does that matter? See attached. If not, how do I go about placing an order for ... (cont.)

I'd like to find a similar short, stout door sweep brush like that depicted in the photo(s) attached.

We have Cascade / LBL sliding windows that tilt in, sideways, for cleaning. The windows roll on a track with holes in it on top and bottom. There are holes in the track to set the open position, and tilt latches to release the sash to tilt in. The track with holes is getting rusty and the window w ... (cont.)

Need window track.

Do you carry the inside storm window glass with a hole for the shade hardware?

Need to order parts.

Hello! I was looking to replace the window show in one of my windows that broke. The channel does have a notch to slide the shoe out for replacing easily but I'm not positive on the size of it or which model to buy. The channel looks to be about 1.2". Any ideas on what size it might be or which one ... (cont.)

I didn't see any markings on the handle, but I have measurements for it. From screw hole to screw hole - 7 13/16 From top to bottom - 8 1/2 Width - 1 3/8

These corner keys in 1/4 inch frame have a 1/4 inch beveled tab which slips under the outside window frame to keep the top of the screen in place. Wat is this called and do you carry them? Thank you.

I'm looking for these Milgard window rollers. The windows were installed at lease 20 years ago. Any assistance would be appreciated.

Requesting 4 Window channels 35" series s380 3440 weight. I need a smaller 7/8" winged balance shoe #15-029 installed instead of the standard 1". Also, 4 top shash guide 5/8" #18-161 without screws included in this order. I did not include a picture of the current channel. Thank you Dan ... (cont.)

These are from one window. The hole spacing is 1 1/4". Can you help me find a similar product.

Hello, This part goes on top of a single hung window. I only need the right hand side, but happy with a pair. The window frame is metal. I don't have any manufacturer info, but the house was built about 1990 and these are original. Thank you so much! Erick

Hello, I'd like to replace these latches on the top of my single hung windows. These do not seem to tilt out. The windows are metal frame. I do not have any manufacturer info, but the house was built in about 1990 and these are original. Thank you so much! Erick

Hello... I'm looking to replace these clips at the top of my single hung window. They are tilt out. Metal frames. The first 3 pics are of a broken clip, pic 4 is where it goes on the window, and pic 5 is an intact clip. They seem to snap into the grooves in the window sash. I don't have any manufact ... (cont.)

I am trying to replace my sliding door lock to a keyed lock and I need assistance selecting the right product. The current lock does not have a Mortise; it looks by a hook and can only be opened on the inside. I've attached some pictures for reference. My goal is to be able to unlock the door from ... (cont.)

Trying to find 4 finials for our thomasville armoire purchased in 1990/91 in Ohio. Appreciate any help you can give us

This corner piece pierces the insert screen frame on a Pella casement window and has a string that goes through it which is also threaded through 2 pieces to keep the string running more smoothly.

I need 17 soft closing hinges. Near the up & down screw is; b 1-9/16. On the back of the cup; Austria 39C855-01

I bought your 39-239C operator after speaking with the Swisco experts.Now, Can you tell me if you have these clips in stock?