Viewing all customer Discussions for:

Other

I am looking for the following parts for the double sash 24" and 28" windows. Image 2 shows the metal bracket that runs along the side of the bottom sash. Image 3 shows a missing spring with cover that goes on the casing. Please let me know if we would be able to find these replacement parts. ... (cont.)

Hello our drawer slide bracket had cracked. We are sending pictures so you can help us find a set that we can replace the brackets. On the bracket, it is inscribed Ferrari part GO23 and on the other bracket Ferrari GO24. Fyi our slider is 17 1/2 Depth of our vanity that the drawer goes is 21 in ... (cont.)

Looking to replace broken spring assembly in vinyl double hung window.

Hello, I need some assistance identifying which window balances and parts I need to order. The window balances is 30" long and 5/8" wide. The "T" shoe is 2" and the white latch is about 2 3/4"

looking for a replacement screen for a Cole-Sewell door. Registration number in picture is 09220096042 0027.

would need both a right and left operators

I need two window baqlances measurinf 1/2" wide and 29 inches from the ends of the metal strip. It lools like one of the balances in your S300 series. The part number stamped on the metal strip looks like 28B and I have included a photo of it. Please see all the photos.

Greetings, I need help identifying the balance springs (see pics). The length is 35 inches. The markings 34-9 HA2 CMC 5 and 34-9 JA2 CMC 2 are visible on the top side. Thank you so much. RG

I need 2 sticks of this bead. Do you carry it?

Need balancers for two windows. Each window uses a 13-2 and a 13-3 Window channel balances 1/2 " wide. 5/8"deep All the balances have the V-shaped hook. All look the same. I saw this hook on your web site in a picture at the bottom of the page.

Needing window latch?do you carry this particular one? I am needing to purchase 4 of them please.Thank youRespectfully,Cindy

Good morning I can't find the part number for my window mechanism. Regards

New problem.. The wheels on the slider that accompanies the glass slider have rotted. Attached pictures of the screen door showing sizes and restrictions. Thank you! You all were so helpful when I needed the glass door handle replaced.

need a new pivot bar mine broke but idk what one I need

My door was installed in 1998 when the home was built. I thought I was an Anderson but I cannot find any logo, model or serial numbers.

Hi, we need replacements for our storm window clips as shown in the attachment. Thank you,

How to install parts # 23-026 & 23-027 ?

I need 2 window locks MTL 10

Hello, Looking to replace the interior and exterior handles as well as the lock on my Pella sliding glass door. This is an old door that is made of wood. It has three glass panels but the door only slides to the right. Please advise which parts I should be looks for!

What I have is an International Window Corp garden window, series 1364 dual glazed. I need the exterior aluminum trim, or glazing bead, that snaps in between the glazing and frame. It is about 13/16" wide, the upper edge has a 1/16" lip that fits into the window frame and there is a lower snap edg ... (cont.)