Viewing all customer Discussions for:

Other

I cannot see any part numbers or markings. Are you able to identify this assembly for me? And I would like to order them It is 3 1/4" long and 3/4" wide steel It broke into a couple pieces unfortunately. This is the frame and tension plate

Hi, I'm looking to replace the glazing on my older (approx 1991) Marvin windows. They informed me that the original profile was called V860, and the approx dimensions are 9/16" x 5/16". Thank you Paul

Good Afternoon, I have an Anderson casement window with a split arm operator that no longer functions properly. It has a 5 inch extension. This is an older window. Not sure if this is useful information, but the number 63 is on the arm and 13C or 136? Photos attached. Would you have this part? Than ... (cont.)

I've ordered the wrong part twice now please help me with the correct my balances are 32A and I need the older looking one which is thinner then the ones I keep getting

Pivot shoe part number AI-87598 Spring part number 407 J

Tilt window latch broke

I also need replacement crank operator with F-9970A-8 marked on the bottom. AW etched on glass Screw mount holes 2 7/8" center to center (c to c) First swing arm is 2 1/2" c to c Second arm is 6 1/2" c to c Are we all SOL on this or is there a replacement? Pictures above look like mine. Buying a ... (cont.)

I'm having a little trouble adjusting a glass/aluminum storefront door. It has a small bit of sag and the pivot hinge only allows raising and lowering the door within the frame. It seems the only option is to: 1. Remove the door 2. Remove the top pivot hinge 3. Modify the the door by filing a slo ... (cont.)

Have all parts the only thing that appears to be broken are the coil balances.They are 3/8 inch wide round hole for window mount is 15/64 doesnt have a weight rating on it that I can see.Height of the window it lifts is 25 1/2 inch tall.The only balance I saw that is 3/8 wide is the series 165 but n ... (cont.)

I am trying to replace the latch on my porch door. The one I removed also had a locking mechanism which I do not care if the replacement has or not. Hopefully, the attached pictures will help. I am concerned about finding something that will cover all the holes in the existing door. Thank you for y ... (cont.)

Hello All. I am looking for the below part. On the left control arm, there is a stamped number:5084L Thank you for your reply.

Greetings!I have windows in need of lifts... hoping you can help!3 pairs have numbers 2830 (30") and one pair has number 2040/30 (22").I have included photos for reference.Also need some of the black plastic parts on the window frame (see photos).Hoping to purchase these parts if you have them.Thank ... (cont.)

Do you have the subject operator in your inventory?

Trying to find door pile for an old door I'm wondering if you can help me out. Thanks Albert

This part comes from an old bifold track that guides the door. The door pin fits into this glide for the door to move from side to side in the track. The part is completely round but sides have broken off due to the age which is about 40 years.

Windows are missing the balancers, also want shoes pivot arm, and sash levers. Will add more photos

Hi, can you help me identify these window operator. I need two right open and one left. Thanks for the help.

This window was purchased in 1992. the photo is of the right side.

My name is Jennifer. If it would be best to call me so I can make it short that would be best? I purchased my house a year ago, my neighbor has the same slider and it is from Pelllgem great lakes, but I do not know the make or model and the homeowner did not transfer the warranty. There is no sticke ... (cont.)

The longer balance is 28 inches long and 1 inch wide. The number on the channel itself for this one is shown in Picture 213413. The shorter one is 16 inches long and 1 inch wide. Details in Pictures 212840580 and 212903476. Window lock is also broken; Pictures 213414 and 213417.