Viewing all customer Discussions for:

Other

I have a vertical window that doesn't stay in place. I plan on replacing the balancer and looking for help to identify the right parts including take out clips. The current channels (metal part) measures 25 5/8", 5/8" depth and 25-4 stamp.

Only thing I see on it is the letter "V" stamped in it

Looking for a replacement skylight motor PN 42.90.38.102

Folding Handle with Cover

Do you guys have anything this size

Where can I order a Lock Mechanism for Sliding Door, (NAMI-302187)

Could you please help identify these window parts and hopefully you have replacement parts. Thanks

I need a replacement balance with these dimensions.Not sure if the channel length is usually rounded off up or down to 26 or 27.Channel length 26.625 26-5/8"ribbed 5/8"deep, 9/16" wide24RB-BS1 stamped Window opening 32"x 54" Please see attached images.Stephen

2 1/2 inches long

I have broken/chipped the Hinge shoes (at both the top and bottom of the sash) and need to replace the hinges on 1 casement window.The part number is 32010PS, on installation, I haven't been able to get both Hinge shoes into the glides at the same time. The sash is very heavy and prohibits much of ... (cont.)

It was on a California Classics divided light wood window that is painted white. The handle broke off at the base.

Measurements are: top housing 1 1/2" height: 1 1/2" there is a flare on the bottom of the housing which makes the thickness of the housing 1 1/16" thick The steel wheel is 1 1/2" There are two screws on the back side of the housing, the bottom screw is the adjusting screw, and the top screw is j ... (cont.)

.121" thick each leg 1.130" long Note one leg has a separation to slide into a partitioned screen frame

Hi, to replace window balancer. It has "32 4 HQ CALDWELL" printed on the side. Could you please show me which part should i pick? Thanks. Warren

I have another widow that is the same as this one, but the crank is missing. Can you identify it? Thanks.

1/2 width, 30" long metal piece, marking "29 5 or S CT CALDWELL, Sash weights 22 lbb

Sorry about being fussy about your site. But, as much as you pay Goggle, I'm sure you want to convert every submission. These pics are the best identifiers. No names, thought the handle might help. The bearings are shot. I could replace a wheel on this part of that is your best approach. Thanks a to ... (cont.)

Two plastic parts are broken. Each of these two parts is connected to either end of the spring. It says " 32 5" "BSIN RR" on the channel. One plastic part is marked "4610108". But nothing is written on the other plastic part. I want to buy both plastic parts. Please tell me each part number ... (cont.)

I have windows bought in 1991 that came from M & W. The one I need replaced is up high in my foyer, about 60 long x 22 wide. If windows that far back can be made or replaced, I'll try to get someone to measure it to be exact. Thank you! Mitzi

Hello I'm hoping this part is still available . I would order 24 of the Img0016 photo. They are a plastic slide part on the window locking device of a Millard window. If this is unavailable through you , I would appreciate any contacts to where i might find them. Thankyou, Jim