Viewing all customer Discussions for:

Weatherization

How soft is the kerf part? Is it difficult to push kerf into window groove? Do you recommend using any installation tool that will not tear or cut the bubble seal?

I need to replace my window channel block. don't know what part I should buy. Please help. the number on the block is 28 4 GW CMC 7. Thanks, Jean

I am looking for wool window stripping. The vinyl strip is 3/16". The wool appears to be 1/4". I need approximately 40' to replace stripping on five windows. Thank You for your tome.

Hello, this is weather stripping for a casement window on a home built in 1993. The hardware says TRUTH with an outline of a house. Thank you so much for your help!

This weather stripping is T shaped with. 3/4" barb and 3/4" t.

Help...Dave

Please help me identify the correct replacement door weather stripping

I have NORCO double-hung windows that are about 1995 vintage. The following is etched in the inside seal of the double glass windows:1GCC CBA 94-3 3/4I am looking to replace the weatherstrip on the windows shown in the pictures attached. There are quite a few windows. Do you sell in rolls?Can you ... (cont.)

Looking for weather stripping for a Kolbe casement window built in 1990 Do you have any? How much and ETA. Thank You !!

Need help to find part number I just order product code 58-050 7/16" but that want fit on my door is litter bigger I just got delivery today is for tubelight door

House built in 1964. Original windows. Bulb diameter: 0.25 Base extension: 0.1875 Do you have a seal that will work? thanks.

Door was installed 2002. CUIFD6068 maybe the ID. Looking for the bulb weatherstrip on the threshold.

The top sealing strip for a Jeld-wen casement window. It is about 5/8" wide and has a 1/4" kerf

Looking for a replacement. have several 8 foot doors.

Compression weather strip for entry door 36x80 all three sides

Hi. I'm looking weather stripping for an exterior door. The kerf opening is 1/4" . I've only found stripping with about 1/2 that width. any suggestions?

Need new seal for leading edge of Pella sliding door. Probable mfr date is 2003-2004. See photos for profile, location on door and Mfr marking on one window pane with numbers.

It goes on the window frame

needed gasket seals for Milgard windows series 5521/5571

Hello, I have casement windows and would like to replace the weather stripping before this fall. The weather stripping has never been replaced and it is starting to disintegrate. The weather strip looks like it has a channel that snaps in the window channel with a bubble body with a flap over the ... (cont.)