Viewing all customer Discussions for:

Weatherization

I'm having a problem finding weatherstripping that fits two Pella exterior doors (roughly 1994 install). Can you help me find the right fit and size?

kerf height is 1/4 in. Total height is 5/8-in. some of my windows do not close all the way so I need something similar to this but taller. possibly a 7/8 in. or whatever you recommend.

I am looking for replacement weather stripping. I don't know if this is the original or not. We are the third owners of this home. The door hinge says Lawrence USA. Thank youSusan

Which Swisco product might I use to replace my broken stripping?

I am trying to find some what I call weatherstrips that are for some 30 year old JELD-WEN crank out windows. I have ben told they call this , snap bead ?? It pushes into a small routed channel in the wood window edge, goes all the way around the panel. Size of glass/window about 22'' x 64''. I ... (cont.)

Hi, I'm looking for a door sweep insert. Can yo assist with identification? Thanks!

The attached photo is of a section of my patio door weather strip. I think this is the original whether strip from a 1959 or 1960 Pella door. Do you know where to find a replacement? White is preferred but I'll take whatever the best is to keep the elements out.

Trying to source replacement vinyl leaf seals and bulb kerf weatherstrip seals for Pozzi wood casement windows installed 1986. Add to that a set of 10 inch Concealed Casement hinges, Truth 30744. Photos of each are attached. Thank you.

Trying to find this weatherstripping. The door is a sliding glass patio door. I cannot find the name of the door mfg.

Need to purchase flange.

have Kawneer doors that are 83.25" tall and 35.625" wide each. Looking to replace the seals. Main concern is the seal between the two doors.

Hello , I am looking for this weatherstrip for a older Pella Casement window it appears the strip is held into a channel on the side of the window. I ordered the 58-178 hoping it would work but did not know they are sold in 38inch length my window is almost 60 inches can you advise please? PS I have ... (cont.)

I have 29 Eagle Double Hung Oak windows that I need to replace the weather-stripping for. Is this something you can help me with? Thanks, Jerry

Looking for weatherstrip for Tubelite double doors. The dimensions are: Pile height approx 7/16",possibly 3/8" Backing width approx 3/8" Please advise if you have a compatible part for our needs. Thanks much.

My current wool pile weatherstrip does not have the center nylon fin. The replacement you sell for the size I need (3/16 x 1/4 )only comes with the fin seal. Will that be just fine to order?

Hello! Just wanted to say thanks for the YouTube post about this job! Very helpful. Anyhow, was hoping to get some help locating the appropriate felt weather strip for my windows. I've included the photos. Also, not sure if possible, but does this come in black? Again thank you so much for your ... (cont.)

I believe part 58-182 looks to be the match, My T-slot is 3/16, overall length is 13/16, and the foam ball is 5/16, which all look to match this product. I need 100'.

I am trying to replace the weatherstrip that is at the bottom of the sash on casement windows. It looks like aluminum. It appears that the same material was used on the casing to seal the top and sides but that is in good condition and I am not planning on replacing those sections. ( Unless we can i ... (cont.)

Hi, I have Pella casement windows installed in 2003, and after all this time the weatherstip on the bottom of the pane are breaking up and coming off the frame. I could not see anything exactly the same as the ones I have (see photos), but I am wondering if this product might be similar enough. Heig ... (cont.)

Weather strip