Viewing all customer Discussions for:

Weatherization

I believe this is a rain strip. Could you tell the part I would need. It's from a wood clad casement window

the u shaped weather strip between the two sliding panes is bad. number on the glass is, ppg herculite k 16cfr1201 c11 ansi z-97.1-1975 5/32 u sgcc - 675 6 013279

Bottom sash seal on vinyl windows purchased about 2004. Slides into t slot on outside vertical face, seals on bottom bulb against sill. Need enough for 8 30" windows.

Please help identify the part.

Looking for something with a base of 1/4 inch and a pile height of 1/2 inch. I have no pictures. Thank you, Marty Sauer

Do you have availability of bottom weatherstrip for 1985 Semco clad casement windows. This is attached to the main frame on the bottom of the sash opening and the sash closes into it. Also looking for weathering for the vertical sash member on non hinge side. Also want to verify insulated glass size ... (cont.)

Hi! We installed our Atrium doors in 2003; 14 years later it's time to replace the weather stripping at the bottom, inside and out, of each door. Can you help us locate the correct product(s)? Thanks! Dave

Do you have rubber weather seal similar to the attached? I

the weather strip below the lower replacement window is cracked. it is 29' long and looks like it is forced in below the bottom of the lower window

I am trying to find a product to replace the weatherstripping on my door. What I have installed currently is a compression type weatherstripping that is force-fit into a

I have your #58-050 that has a 7/16" backing but it is to small for the t-channel on my door it keeps falling out.I need a 1/2" backing. is this something that is available? Thank you mike c

My doors say "Vortex" on them. They are double doors to our shop, 30" wide each. I need replacement brushes/weather strip between the doors. The metal base appears to be slightly wider than 3/8" (metric?) and there's about a 1/4" between the doors. Additionally, I'd like to put a slide bolt ... (cont.)

Unfortunately my dog chewed up the weatherstripping on my door. It is foam filled with a hole in the center. It slides easily in and out of the track for replacement. Cannot identify who manufactured the French doors. They are old. A local lock smith could not tell us who made them. Thanks, ... (cont.)

I own a 1982 Florida home. It has an 8'x 74" 2 4' door set. There was an "eyebrow" running in a track (I am talking small nylon fabric with nylon brush like bristles). Approx 1/4" (fabric) with approx 3/16" bristles. Piece is 4' long. There was two per door. I believe they were to keep mosquito ... (cont.)

Gray compression rubber gasket for a 50 year old casement window. 3/16 x 1/8. Need a 1000 ft roll to start. Thank you.

Please help identify bubble seal replacement. Diameter = 1/4" base tab = 1/8" (or maybe 3/16"). thanks, Dave

Hi, I noticed a leak from our skylight, which has a Paeco sticker with the serial number of 86872. It seems that the gasket on the room side and the roof side is brittle and cracked. Is there a replacement kit for this gasket? I think the window itself is sound as there does not appear to be ANY ... (cont.)

Hi, Please help! I have looked and looked for the correct replacement. I hope you can help. Our EMS and Fire Station was built about 10 years ago and we have 2 areas of double doors that are metal and glass EFCO brand. There are 2 woolish strips on one of the doors. It slides out easily. Looks ... (cont.)

Appreciate your help in identifying this wool pile weatherstripping. 1. Width reads a little over 1/4"W; order 9/32"W? 2. Height reads a little over 1/4"H; order 1/4"H or is 9/32"H available? 3. Will the optional center fin seal work as a better replacement? Thanks, Don

Hi I would like to replace the weatherstripping and sweeps for 6 Pella doors, all 33 3/4 inches wide. Photos of the numbers and weather stripping and sweeps are attached. I am pretty sure PELLA PUSH-IN BULB WEATHERSEAL Product Code: 58-181 is the right weatherstripping. Not sure about the ... (cont.)