Viewing all customer Discussions for:

Weatherization

I have your #58-050 that has a 7/16" backing but it is to small for the t-channel on my door it keeps falling out.I need a 1/2" backing. is this something that is available? Thank you mike c

My doors say "Vortex" on them. They are double doors to our shop, 30" wide each. I need replacement brushes/weather strip between the doors. The metal base appears to be slightly wider than 3/8" (metric?) and there's about a 1/4" between the doors. Additionally, I'd like to put a slide bolt ... (cont.)

Unfortunately my dog chewed up the weatherstripping on my door. It is foam filled with a hole in the center. It slides easily in and out of the track for replacement. Cannot identify who manufactured the French doors. They are old. A local lock smith could not tell us who made them. Thanks, ... (cont.)

I own a 1982 Florida home. It has an 8'x 74" 2 4' door set. There was an "eyebrow" running in a track (I am talking small nylon fabric with nylon brush like bristles). Approx 1/4" (fabric) with approx 3/16" bristles. Piece is 4' long. There was two per door. I believe they were to keep mosquito ... (cont.)

Gray compression rubber gasket for a 50 year old casement window. 3/16 x 1/8. Need a 1000 ft roll to start. Thank you.

Please help identify bubble seal replacement. Diameter = 1/4" base tab = 1/8" (or maybe 3/16"). thanks, Dave

Hi, I noticed a leak from our skylight, which has a Paeco sticker with the serial number of 86872. It seems that the gasket on the room side and the roof side is brittle and cracked. Is there a replacement kit for this gasket? I think the window itself is sound as there does not appear to be ANY ... (cont.)

Hi, Please help! I have looked and looked for the correct replacement. I hope you can help. Our EMS and Fire Station was built about 10 years ago and we have 2 areas of double doors that are metal and glass EFCO brand. There are 2 woolish strips on one of the doors. It slides out easily. Looks ... (cont.)

Appreciate your help in identifying this wool pile weatherstripping. 1. Width reads a little over 1/4"W; order 9/32"W? 2. Height reads a little over 1/4"H; order 1/4"H or is 9/32"H available? 3. Will the optional center fin seal work as a better replacement? Thanks, Don

Hi I would like to replace the weatherstripping and sweeps for 6 Pella doors, all 33 3/4 inches wide. Photos of the numbers and weather stripping and sweeps are attached. I am pretty sure PELLA PUSH-IN BULB WEATHERSEAL Product Code: 58-181 is the right weatherstripping. Not sure about the ... (cont.)

When I was making alum & vinyl windows and doors years ago (when vinyl welding was just a "twinkle") we used to call "wool pile" weatherstripping by its generic name... not "fuzzy stuff"... It was even purchased by that name... And the groove in the frame member thru which it was slid was called the ... (cont.)

I've been unable to find replacement kerf weatherstripping for my door - the size is the problem - it is about 3/4 inch in diameter, as shown in the picture.

Hi I need to replace some weatherstripping on numerous door and I am having trouble finding what I need. Attached are photos of the kind I need both in tan

Where looking for a weather strip with a 1/2" backing. We show a picture with a 7/16 backing and it keeps falling out if you could help us with this it would be great. thank you

I am looking for this profile,the Anderson bubble looks close but I'm not sure it would work. I have no idea of the make of window,there is no name emblem anywhere.

This is for 2 bay windows. There is a grove the weather stripping slides into. Windows are @ 12-14 years old, no name on them

I need to replace the weather stripping on all of the windows in a house built in 1994. The windows are Marvin casement windows. Please see attached photos. Do you have replacement WS that might work? Thanks in advance.

I need a part ID for the bottom of vinyl windows.

Good morning, Last week I placed an order for your 58-135 3/16"x3/8"T type bubble window seal. A picture is attached. The seal fits perfectly in the channel at the bottom of the sash but the gasket is not large enough due to the slope of the exterior sill and there is still a gap. I was unable ... (cont.)

Can you match thus glazing bead and Weather strip for Anderson windows