Viewing all customer Discussions for:

Weatherization

I think I need to replace my weatherstripping on my patio door, bit need help identifying what I need. This is the top jamb, between sliding and stationary door. measures 5/8" high, 1/2" and snaps on. or....will the wool pile be the better option? thank you!

Hi. I have a sliding patio door and the movable door has no weatherstripping, even when new. Photos: 1) The fixed door has weatherstripping on the surface that faces the movable door, not on the edges which I would call the width of the door. 2) As I slide the movable door, the track is visable ... (cont.)

I ordered the smaller size think I need 7/16x1/4

I am looking for weather stripping for an armelite store front door. can you help? thanks, rand

Hi. Can you help me identify the manufacturer of my basement window pictured? It is an inward open French casement window. I need to replace the bottom weather strip / seal. It is compressed and allowing water to seap in during heavy rain. The drainage track and holes clear. The only identifyin ... (cont.)

I ordered the Wool Gray Pile weather stripping. Are these sold in 25 foot long pieces?

I have a black aluminum sliding window labeled 'A Therm'. the weather stripping between the two sashes is damaged and I need a replacement. Would you know which seal I would need to purchase? Thanks! -Rob

trying to find these replacement parts for my Louisanna Pacific windows

I need replacement felt for a Kawneer door. Above the lock is 1/4" x 46" and below lock is 1/4" x 32".

Hi, I'm pretty handy and would like to replace the worn out weather stripping before our bitter cold hits soon. I can only find the simple weather stripping, but I need something that will go over the gap where my lock is. can you help? Thanks, Lou

Need door sweeps for (what I have been told is)a Pease door. It is 36" x 1.75". Doors are steel covered, wood core entry doors. Also need parts or replacement thresholds for the doors. 2 @ 36", 1 @ 32". The thresholds are 6" deep, about 1" high under the door and .5" high outside edge. ... (cont.)

Could you tell me what the fuzzy stuff is that slides into the screen. To keep dust dirty and bugs out. I need to replace that stuff but don't know what it's called. Thank you

Good morning Some advice needed please I have purchased some replacement window felt and weatherstripping tube stock When removing the tube seal on bottom of windows some are glued or silicones into the track and some are not Thoughts please Should I re hauls or try to clean up the mess and install ... (cont.)

I cant get the window strips out. Ive tried a screwdriver and pliers with no luck. Therefore i cant get part of one out to send you so i can get the correct size.

Old sweep from 30 plus year old house. It has a metal track on bottom of door that is riveted to the bottom of the metal door. Do you have one that will work? Door sweep is 1 3/4" by 36"

Looking for 96" door edge replacement like photo

All seals have came off of the bottom of the windows. Windows are 15 yrs old

I purchased this bubble seal: 3-16-3-8/pd/Bubble-Seal/58-135 However, it is loose and does not stay in my window. Upon measuring my existing seal, it looks as if the "T" section of the seal is 1/4" wide. But, it doesn't look as if you sell window seals of this dimension. Is this correct? ... (cont.)

Norco Casement windows installed in 2001 windows ice up in the winter apparently there is no seal from window to the frame , any ideas .seems to have a bulb type seal around perimeter but apparently it does not work .

The "t" piece is 5 mm overall but the upper leg is longer than the lower.