Viewing all customer Discussions for:

Weatherization

We have a customer that has Lousiana Pacific wood clad windows from the mid-90s, Casements that he needs replacement of the bulb vinyl weatherstripping. Do you have any product similar?

I definitely have the leaf weatherseal on my casement windows and will order some from you that will replaced damaged ones. However, many of the existing seals appear undamaged but fit loosely and come part way out of the slot over time. I can push them back in the slot but they come back out after ... (cont.)

This is felt weatherstripping 3/8 inches wide at the bottom burlap-like material that slides into the metal track along the door frame. The felt is very matted down after dozens of years use but seems to be about 1/4 inch high and about 5/8 inch wide. Hopefully the photos will be clear to you. Th ... (cont.)

Can you please tell what a good replacement would be for this weather strip.

This is installed on the bottom of in inswing door and I am having trouble finding a replacement. any ideas? the total height is 3/4" including the insert fins and it is 1/4" thick. Dennis

The dimensions are on the attached jpeg. No names, markings or numbers found.

Trying to find the correct gasket/seal for 1980s (house built in 1988) pella casement windows. Appears to be insert (with a couple barbs) and 90 degree "tab" for the seal.

That strip that is in between the window and the screen has completely deteriorated and bugs get in between the window and the screen. If I could get this part I think I could replace it myself--Linda

We have two acorn dorwal sliding glass doors. They are about 25 years old. Every time it rains, water comes in on the inside track. Recently, during a very heavy rain, the water came in and drained into the family room below, damaging the ceiling. Is there a reasonable solution or do we have to ... (cont.)

sweep is T shaped. Top of the T that slides into the door base is 1/8 inch.

Need to replace weather stripping on AW sliding glass door. There are two separate stripes. Outside edge and inside edge. HELP !

Hello...the wool pile in my aluminum tilt windows for my townhouse built in 1987 are pressed into the channels every few inches. Unfortunately, I don't believe there is a way to replace them. Is there anything that you can suggest? I'm ready to order a bunch of replacement parts to begin my re ... (cont.)

These are wenco/ jeldwin Windows.i need weather stripping. See photos Attached. Is this the 58-055? Need 200 Linear feet. Please help.

I'm dealing with the subject door. I need: (1) Weatherstripped Faceplate - 1 1/8" x 7 1/4" Beveled-Brush Aluminum-I have a part number but am uncertain if it is the correct one. (30') Weathertripping (Wool pile). The existing weatherstripping measures 11/32" x 11/32". (2) Door Sweeps (W ... (cont.)

Please look at these photos and let me know if you might have a replacement for this glazing. If I can't replace it I'm going to be forced to remove and replace a perfectly, good 5'x6' storefront window. Sure hope you can help me. Thank you Tim

Hi, This is a photo of the current weather stripping that I need to replace. I submitted an email with the details with this reference #. The piece has a 3/16" base with a 5/16" or 9/32" white pile. I need 24'. Please let me know if you have this item and how much it costs and your part # t ... (cont.)

Dear Swisco, I searched your pictures and can not find this weather strip. I am not sure if I am looking in the right place. If you can offer any help that would be greatly appreciated. Thank you

We have single vinyl hung windows by Barber and Ross (now bankrupt) manufactured approx10 years ago. The weatherstripping slides into groove on all sides of windows (see attached photo 1). The stripping along the center section where the windows meet is approx 3/16 to 1/4" base and is 1/2 inch w ... (cont.)

We just moved into an a home that was built around 1990. The house has wood casement windows

Weather strip for bottom or movable slider