Viewing all customer Discussions for:

Weatherization

The picture that is more clear is the outside jamb w/s. I'm looking for this part along with the Head stop w/s. I don't know the door manufacturer. Let me know if you guys have any idea who makes this and whether or not i can order these parts or use something different. Thanks Dylan Patio Door R ... (cont.)

Good afternoon, we have several Rollyson aluminum windows (34.5" and 43.5" wide where the weather stripping in that attached images have disintegrated or just fallen off. Do you sell replacements and how are do we attach to the top of the window? Any special glue?

The notch the sweep slides into is 3/8 inch wide, the channel 39 9/16 in width. The hanging down part of sweep measures 9/16 or could be 1/2--hard to get a tape on it. What sweep do you recommend. Thank you. LF

After looking at the website. I am fairly confident that I need part 58-178 rain strip for my 22 year old Pella casement windows. The specs on the strip say it comes in 38inch strips. I don't think a single window I have is that short. Do you put 2 pieces together to seal a 60 in window? ... (cont.)

We had the original dimension of the gasket fabricated by a manufacturing company see attached shop drawing and we replaced the gasket and water tested the window. Due to the windows age as well as some minor adjustments to the window and frame over the years, the original size is not making a t ... (cont.)

This is a cross-section of weather striping on a vinyl casement window. It is kerf set. the kerf edge approximates 1/4 inch long and 1/16 thick. Half round "bubble" is 1/4 inch wide, 1/8 inch high. the "wing" is approx 3/8 in length. I know you may not have an exact match but do you have some ... (cont.)

The weather stripping at the base of our windows is falling apart and I need help identifying the vinyl weather stripping for our windows. I do not know what make/model windows we have. They are original windows and would have been installed in approximately 2001/2002. The photos I uploaded inc ... (cont.)

I purchased T.270 foam weather stripping item#58-171 and the plastic that slides into the slot on window is to large. Does the T.187 item# 58-182 have smaller plastic strip or is that the foam size?

I am looking for weather stripping for my GeldWen windows. They tell me they are JX-7 series of window. The weather stripping seals the contact area between the top window and the bottom window. I need weather stripping as in the attached picture. Can you help? Joe

I am looking for the brush seal for windows do you supply these?

Some other details: - ~1/4" in diameter (compressed from window being closed, distorted slightly from thick layers of paint) - vinyl (?) covered foam bulb with plastic base, base is shaped like a "T" The horizontal (top) cross of the "T:" - one half has two clear flexible "fins" pointing inwar ... (cont.)

Hello. I have 1998 era MW double hung vinyl windows. Do you have thi s weatherstripping?

It has 2 screws on either end, I removed the screws but was unable to get the seal out. I didn't force it to hard in fear I would reck something. Wasn't sure if this was the seal or if a seal fits into this.

I'm in need of a replacement shower door sweep. I've included a picture of the aluminum hinge part. The sweep goes up to that and then the seal slides into them both. I'm having troubles finding one.

I have 70s-era sliding windows (aluminum) that have worn piling. I'll attach photos. The base of the pile appears to be 1/4 inch. Can't tell the height because the pile is so worn down.

I have Simonton Dimension One Series casement windows. The current weather stripping is foam with no offset. Would the Kerf mount bubble seal 5/16", part # 58-053, work as a replacement or do you suggest a different one?

Hello, I received the rollers you guys helped me identify and they're perfect. Now, if you can help me find the correct wool pile and bubble seal, I'll be back in business and, once again, have a sealed and quiet door. Attached are four photos showing the pile slots and cross section of the 'square' ... (cont.)

I need to replace the weatherstripping on my Certainteed vinyl windows. The weatherstripping is white, 1/4" high with a 3/16 base and a double fin. Your website shows the 58-127 weatherstripping. Does it have a double fin, and if not is the double fin necessary? Thanks, Jim

These are old storm windows, probably installed in the 1970's. The photos are the best sample I could find. Most other places are shrunken/disintegrating. For the weatherstripping/wool pile that I need to replace, I measure the width of the base as 3/16". But the height seems to be 1/8" or l ... (cont.)

We believe this was on the frame, opposite the hinge.