Viewing all customer Discussions for:

Weatherization

Hello, Looking for replacement bubble seal for these dimensions. Do you have them in these sizes ? Thanks Patrick

We are having a hard time locating weather stripping that is pictured. It is for EXTERIOR DOOR BOTTOM WEATHER STRIPPING. We need 40" long.

Could you please recommend a door sweep for this 36" wide metal entry door? I believe this is the original door from the mid 70's, so it doesn't have to be exactly the same, just looking for an effective solution. Thank you!

I need replacement weather stripping for my Marvin windows. Can you help me what to buy?

Door is from 1988 era looking for bottom weather strip

My weather stripping measures: 3/16" x 1/2" White with a type of filament in between Do you have this dimension?

Hi there! We would love to replace the edge of our window, I guess it's the seal? We need it for all around the window, top, bottom and sides. Window is 23"w x 34.5"h, and it's the kind ow window with a crank to open it. Thank you, Anna

I'm looking for replacement weatherstripping for a back panel on a Pella Sliding Patio Door. I've attached several photos of the weatherstrip. It appears to be similar to some of your bubble weatherstrips without the flat portion. If you flatten the strip it measures 3/4-7/8 of an inch. Panel is ... (cont.)

i am testing this as i have tried to send 4 pics in a submission to you and it just comes up an error occured

my seal looks like your 58-053 except it is foam filled! The measurements are exactly the same as yours, except for the foam. I do not see an e-mail address to send a picture??

Is your Larson Double Sweep product code: 40-208 interchageable with an HSI storm door? It looks exactly the same as what is on my door now.

Have removed all the bulb weatherstip from our 1987 crestline casement windows. Bulb is 1/4 inch diameter, barb end is 1/4 inch long. We have 31 sashes to reseal. Found no markings on windows.

the door is a part # 400clm it's a wood core steel door. this is a picture of the bottom sweep it's 1 3/4" wide the closed sweep is the inside part of the weather strip this is a stick on sweep there is no track on the bottom of the door that is slides in to. it's a 36" door. Please help winter is ... (cont.)

My windows is from MI. I see your 58-183 looks very similar and 58-164 also look similar but without the foam. Will the 58-183 work for my window?

I have 10 aluminum anodized casement windows with wood veneer interiors. I don't know the brand. The only text info is in the upper insulated glass space and it says, "Low e March 10 2006" The weather strip in the photos is on the outer edge of the window. It's a press fit into a slot. The strip ... (cont.)

Good morning I'm looking to replace my french door weatherstripping that's mounted to the door that normally stationary. This is the weatherstripping that's mounted to seal between the two doors when closed. It appears from pictures that your 58-173 would be the replacement that I'm looking for. ... (cont.)

Doors installed about 20 years ago. supposed commercial grade.surround indoor pool. no name markings anywhere to be found. very drafty in the winter. looking to replace weather stripping. thank you

To: Customer care, I am looking for a seal as shown in the attached photo. It

I ordered your 58-053 5/16ths bulb weather stripping. My question is should I wrap the edge with the weather stripping, cut the edge with the end extended out past the window so it is even with vertical bulb, or simply cut the bulb even with the side of the window. The original seal was cut even ... (cont.)

I have a Stanley entry door and the magnetic weather stripping is tore up at the bottom. This is the piece on the latch side. The door I have is a 36