Viewing all customer Discussions for:

Weatherization

Swisco, 7/31/14 Below is a picture of my exterior entrance bubble door seal. The grid lines in the back ground are 1/4" for reference. I have also included a sketch of the door jamb corner where the seal is to reside. Do you have a replacement seal that can fit this configuration? Thank you, ... (cont.)

I am look for new weather stripping for some 40 year old marvin casement windows. It appears to me that the old weather stripping looks like your part #55-106-6, can you verify for me this would be the type I need?

need Wool Pile with 1/2 inch backing and pile height at least 5/8 inch. color optional with availability.

Hi, I'm searching hi and low for a replacement seal here in the UK, it's turning out to be impossible. Can you help? Would you ship to the uk? Attached are 2 images. many thanks for your help. Regards, Simon.

looks like a 3/16" slpine and a 7/16 or 3/8" brush. It went on an Andersen screen door.

Hi, I just checked my windows and some of the wool pile seals look like they were inserted during manufacture and it doesn't look like the can be removed easily. Is this likely or am I just not looking hard enough ? thanks Daragh

The weather strip on my sliding door is grey wool pile 3/16 x 7/16. Do you have this size?

For part 54-176 is the sweep installed with the screws on the outside of the door or the inside?

This is from a store front door built in 1972. Backing is 1/2" wide plastic, with a single brush (?) that may have been 3/8" or 1/2", but I lean to 3/8". Center has a total of 6 doors 7 feet tall, with two sides of this each.

I just recieved my 58-085 weather strips. The first and last holes line up with the original holes, how ever the other ones do not match up at all plus the holes are to small for the fasteners. I have 14 of these things to install. I will have to redrill around 8 holes per strip or use small head ... (cont.)

I have a house full of 16 year-old Pella windows. The black rain stripping is deteriorating from around the casements. These are aluminum-clad wooden windows. The rain stripping is 5/8" wide with two 1/8" barbs along one edge (pictures attached). I would like pricing for replacement stripping. ... (cont.)

I am looking for 30 feet of this bulb seal...the bulb is 3/16" in size and the mounting "T" is 3/16" wide, and it stands a total of 1/4" inchCan you help me with this product.

Hello I'm searching for replacement weather stripping for a Pella casement window. Picture of the old strip is attached, measures about 5/8 inches? Can you recommend? Its brown, but I'm less concerned with color than I am fitting.

Hi, I've measured a good piece and it's .188 x .188 with cloth backing. Is this 58-021 cloth or poly backing? This sliding glass door is probably from the 70's but can't find any identifiers. I've tried some Hardware store poly backing and can't get it to engage well using a proper size curved p ... (cont.)

I am looking at replacement bug stop on your website. The opening on my door measures 5/16. Item 59-054 on your website measures 11/32. Do you think this will fit my door? By my calculations 5/16 equals approximately 10/32.

The flattest part is 3/4". The "J" or "V" hook part is 1/4" and is what snaps into the casement window to hold it in. there is a little "lip" on the opposite end of the hook end that hugs the window and allows the casement to open and close without pulling the weatherstripping out. The windows ... (cont.)

We are looking for the replacement bumper seal for the door sill. Please take a look at the attached photos. Your code 58-134 Commercial Bubble Weatherstrip is the product I'm looking for? Please check and let me know.

I am trying to find this type of weather seal. These window were put in around the late 80's early 90's. Were are trying to replace what has fallen out. Please help. Thank you, Jennifer

wood window foam/bubble weatherstripping

I need to replace some old weather stripping, but can