Viewing all customer Discussions for:

Weatherization

Looking for this bubble seal for some windows looks like the seal is about 5/16 thick the round part of it

Hi, looking to iD weatherstrip bulb style for 1988 built house with original casement windows. Lots of truth hardware but I'm not sure of the brand. Here is a sample of the profile. Its very different from what I see available. Thank you.

Need replacement seal for aluminum frame crank operated louvre window installed 1968... could you clarify part number / suiable replacement

Can you help me identify the piece of plastic trim at the bottom of a window Its 1/2 in wide and 32 in long and it clips into place

I have purchased before on my account but do not see this in padt orders.Leo Everyday odd jobs

I attached two photos here. One is normal with the trim. The other one is missing the trim and can see the edge of the glass.

Older NUAIR window bottom weather strip

Do you have the part that is in the enclosed picture?

Hello, I need a weather strip for my prism window. I will attach photos. It does have a little plastic piece that runs down the middle if that helps.

I want to make sure Im getting the correct seal. I have 15 windows most are 35 inch wide

Metal commercial door double. Weather stripping slide in 3/8 in gab 1/inch

I have a 1962 built home with original sliding aluminum windows. I need to replace the weather stripping as the old weather stripping is shot (I don't think it has been replaced since 1962) and a lot of air seeps in around the window thru the gaps. The weather stripping runs around the frame of the ... (cont.)

Do you carry this shower sweep? I need 27-36 inches. It is about 1 inch wide. Please let me know.

Good Morning, See attached photos. Any help would be much appreciated. Sincerely,

Hi I was wondering which window glazing bead I need.

I have commercial Tubelite Doors and need to replace the weatherstripping between the door. The backing on the current stripping is 3/8" and there is a 1/8" gap between the doors (not sure what the pile height is ~ the existing weatherstrip is very worn).

I need a replacement pella weather stripping for the vertical part of the door. The door has a groove in it for the flat part of the stripping thanks

Item appears to be 7/16 in height. I'm trying to cover 17.5 feet.

Please help me find the part I need for this windows need a 3 foot piece and a 22 inch piecethank youCecilia

Hi! I am looking for a new weather pile for my window. I live in a condo building and I have an email from the board that says it is a Windsor "Next Dimension" series window, it was installed in 2018. The piece seems to have come out of its seating. It has gray hairs with plastic on either side and ... (cont.)