Viewing all customer Discussions for:

39-084 Crown Window Crank, RH

Need crown awning crank RH white

I'm trying to match an awning operator. Your 39-084 is almost an exact match. If the old arm extension is 2-1/8" verses the 2-1/4" on the crown, would it work properly installed?

Need replacement operator.

Hi, We are in need of this item, pictures attached below. I would really appreciate it if you could reply to this email or call

Hi I am trying to replace this crank out for my awning window Looking to see if you can match it up. Thank you in advance if you are inside looking out the crank is on the bottom right of the window.

Looking to replace 3 Operators for my louvered windows on sun room porch. Unsure what model matches as I have been unable to find any markings on existing operator or window to identify manufacturer. I have attached photos and am hoping you can advise.

I ordered a 39-259 window crank from you guys that I thought to be the correct window crank. It turned out that all measurements are correct, but the window doesn't close completely. After measuring the arm that comes out of the window crank I saw the issue: - My old window crank has a full arm l ... (cont.)

I was able to open but not close my bathroom awning window. Its like the gear stripped. It is a right hand crank. The manufacturer is Alcan and it was installed in 1986. The inside of the handle is stamped -11500-11 Pat Pend I can send more photos. I was limited to 5 in this submission. Thank you. ... (cont.)

I have old windows (1978) with right crank-style operators. 2 styles as follows: 1. 2 holes on top 5/16 inch apart and 2 holes on bottom 1 5/16 inches apart. Opener is 5 1/8 inches long. Arm length is 2 1/2" with a threaded hole which is 1/4 in diameter. 2. 1 hole on top. 2 holes on bottom. ... (cont.)

Hello and thank you for doing and selling what you do!!! I found a Patent Number on the plastic lock part that broke and fell off the other arm to my awning window. I searched it in Google Patents to find the attached mages. A good one at that. However there are no measurements. I think this is an ... (cont.)

Looking to replace my awning window (Jalousie Window) crank. I looked up the patent inside the part D-198,202 and is was originally registered to Amerock. The worm gear is shot. I've included 3 pictures One is the dimension looking from the window attacment perspective. The other two are the op ... (cont.)

My operator looks like your part #39084 but l can't tell from the picture if the mounting holes will line up.... the total length is 5 7/8 inches....the center to center measurement of the holes on the arm extension is 2 1/4 inches....the bottom mount holes are staggered (one higher than the othe ... (cont.)