Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

I'm sending pictures per your request to see if you can match a crank up for our windows. Need a left and right hand if available that will match up. All measurements and part numbers are listed for the windows in attached ipicture.. Let me know if you can match the crack and covers for both sides. ... (cont.)

Its a Milgard casement operator. Do you stock this. Getting parts from Milgard is like pulling teeth.

Trying to repair broken crank mechanism. Handle turns, but brass bushing appears to be stripped and does not provide resistance to open/close window. I don't see an allen nut socket which might secure this type of bushing). "Truth" stamped on one of the lever arms, "Window Shield" on the handle (wi ... (cont.)

Good morning, I'm wondering if you have this window crank? I believe it's from an earlier model Jeld-Wen casement window. It is is a folding handle. thank you for your time and be well....Dave

I have both left and right side cranks that need replaced on my bay window. The brass arm connected to the gear says TRUTH and the inside of the white housing is marked with MADE IN USA and U.S. PAT.4505601, PAT.CANADA I986, U.K. PAT.2I35397

Hello, I have the "Truth" crank operators that will not open and I am not sure what to order. Please see the attached pics. Thank you, Darrell

I'm looking to replace the operator mechanism and the clip attached to the window. Prefer a white, fold away crank. It would be ok if the window had to open a few more inches. Can you suggest the parts? Thank youTom

I am looking for a crank operator for a Crestline casement window.

Hi, I need 4 crank covers (see picture one). 1 in the bronze color and 3 in white. These seem to be Pozzi/Jeld Wen casement windows (see picture 3. I also need 1 new locking hardware (see pictures four and five for a complete one). Picture 2 shows the window lock that is missing the lever. So, ... (cont.)

I'm looking to change the lock and crank to white.

I would like to replace the pictured wing handles to foldable crank handles. First is that possible? And After reviewing your info I'm thinking 39-114L but I'd prefer a foldable style handle. Would 39-205 work? Thank you.

My research has led me to 39-027E, and it's opposite, with new window channel things...as the closest I can get... I'll need 5 total, 4 right (I believe) and 1 left, with handles, and the channels for the window. Before I order, am I on the right track?

does this dual arm operator 39- 032 accept a 11/32 handle? If so, does it come in bronze and have the locking screw to hold the handle in place? Thanks, Cliff

Universal casement cranks are round inside but mine isn't. Didn't have any luck at 3 hardware stores.

I currently have handle Code: 39-114L in use on my casement windows and want something a bit more compact so blinds can lower. Is 39-205 able to be swapped out to get a more compact result or would more modification be needed by swapping out the assembly?

45273 crank mechanism, L31539 short curved arm about 3 1/4 inches, 20748 connecting arm about 3 inches, bar on sash is 11 3/8 inches, stainless guide is about 10 inches.Main arm is about 9 1/2 inches long.

Hurd casement windows Need right and left split arm Installed 1995 Goldtone hardware Window size 23 x 35 From the base to where the right angle arm attaches is 4 inches the small arm piece that attaches with the sliding clip from the stud to hole is 3 1/2 inches 7702 imprinted on bottom ... (cont.)

I?m looking for 11 Thomas glad window handles for a crank window. A few of min need replacing.

I need help to find this dual arm operator. the offsets on the arms are not matching anything i find. the long arm straight is 10"

I have attached photos of some window cranks that I need from what I can see is the part number is 30744B.