Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Operator ID Help

My name is milton Pls do you have this type of handle for windows id so pls advise . thank you and hope to ears from you

All of the windows in my kitchen have broken hardware, and as a result, I cannot open any of them. They are all casement windows with crank hardware and plastic latches. In two cases, the crank operators are broken and in one case the locking latch is broken. I have contacted a few handymen to se ... (cont.)

Looking for this part

I have a customer with atrium windows missing one of these handles. I thought these were Anderson windows at first Glance so I took the info I had: (house built in 1995 and bright brass hardware I was able to cross eliminate & get a handle mailed to me. Unfortunately it was wrong the angle & thickne ... (cont.)

my number on the crank looks like 234 31 the best I can tell or it could be this number in reverse if you have one that would work please advise

I've already ordered the handles for 2 windows without realizing I needed to replace the crank mechanism. Here are the pictures I took. Currently we're not living in the house. I didn't have pen & paper to write down numbers. Thought my picture would show it, but it didn't. I can get them later ... (cont.)

Hello - I need to replace a Weathershield Window Crank, Model #45199. The 'housing' it's attached to also needs to be replaced. Please LMK if you have something suitable. Thank you.

The crank handle mount completely broke and the handle has come out. The windows are rather old (CertainTeed). The long arm appears to be 9". The assembly is TRUTH and shows number 40471 stamped on the base. The short articulated arm shows 20810 on the end by the window attachment and 30841L on ... (cont.)

Replacement Patriot casement Windowless

Looks to be manufactured by TRUTH. Has multiple number stampings. Gear area - 40471. Short arm - 20755 and 3084IL. Long arm stamped "Entry Gard".

I am pretty sure that these are 39-031 and 39-032, but just wanted to check before placing the order. Also want to confirm that I can use 39-107 fk with these as a replacement for something that looks 39-107 + 39 114L. I have a bunch of windows that need new hardware and wonder if it is common ... (cont.)

Good morning, I need help in identifying part. I tried to do it on my own but failed. Please see attached photos

this is wright window operator 131/2" the operator case works fine but as you see on picture#4 the crank shaft is broken at the bottom ,do you sell just the crank shaft or i have to replace the operator and what operator do you suggest,my case width is 4"?

I need a replacement as pictured in the attachment. I need the entire window handle crank and cover

Attached are pics of my window operator. Can you help me identify which part I need to order? Thank you!

hello, please check the attached photos and call me to order parts. Thanks Al

I talked with a K&K customer service rep and they gave me the following information from what I described to them. Operator: left - 5054390 right - 5057010 Crank handle: 5016830 Crank cover: 5007680 Before I proceed to order anything I wanted to double check that these are the parts ... (cont.)

Marked with truth brand. Looking for replacement.

Will this crank work with a Millard window?W