Viewing all customer Discussions for:

39-150 Andersen Straight Arm Operator, 8-3/8" arm

Can you replace a 9 3/8 operator with an 8 3/8 operator?

We have some windows with needed parts, as you can see in pictures rusted. Looks like we need a channel guide and arm.Looking to replace butterfly handles with crank style handles. Anderson windows. Can you help identify your part number. Thank you.

Hello, I measured the arm and it appears I need the Andersen operator with the 8 3/8" arm. However, the operator covers I have don?t have any holes. Please find the attached pictures.

Hello, I have Anderson wood casement windows throughout my home with about half that have cracked and broken what I would call "housing" on the inside of the window, and when we attempt to crank out, most will crank out, but will not close/ return. Can you help me identify the parts I need please? ... (cont.)

What anderson window crank goes to a 1987 out window i just want to be sure to order the right product. For some reason i can attach a picture Thank you, Kyle

Operator arm broken and detached from window. Trying to determine replacement parts needed. Two windows open left to right; one opens right to left.

My problem crank assembly appears to be very much like your part numbers 39-150 and/or 39-094. However, mine does NOT have the screws that mount the cover onto the assembly. Length wise it seems to be in-between these two are far as the armature.

Hello, The hand crank case for this window is cracked and no longer working. The window measurements are 44 inches tall by 21 inches wide. The hand crank measures 4 1/2 inches wide by 1 1/8 inches in depth. Could you please help me determine what part number I need to replace this crank? I ... (cont.)

Is the picture enough info for you to cross reference? I recently bought 32-080 from Swisco & they worked perfectly. That made me think of seeing if you have the Anderson operators. Thank you, Jack

I recently purchased your Anderson operator #39-094 and 39-095 I thought the 9" arms were the correct length as they were the only anderson straight arm operators on your website. When I took the old operators out the arm is only 8" long. Do you carry that operator or am I going to have to go to And ... (cont.)

Hello can you tell me if you have this part?

Hello, I have a 23.5x35 inch (roughly) kitchen casement window (Andersen), and the crank handle no longer closes the window. It will open, but the crank simply comes out of the fixture when I try to close the window again. Reading other posts, it seems like the worm screw has disengaged. I have att ... (cont.)

Hi, We are remodeling an older home and looking for replacement Casement Window Crank Operators. The windows are vinyl and the crank handle piece attaches to wood. These are the approximate sizes we are looking for: Left - 9" arm (3) Right - 9" arm (5) Left - 11" arm (2) Right - 11" arm ... (cont.)

I had to email these for pricing. I was unable to add them to the "identify your part". I am in need of two LH and two RH operators pictured below. I also need 4 cranks and 4 covers as well. Please respond with pricing, to see if I can place the order upon approval of homeowner. Thank you! ... (cont.)

Can you help figure out what parts I need? It's just under 4 inches measuring between the screws. The crank was broke, you could open the window but not close it. Thanks!

Hi Swisco, Attached are the pictures for you to identify the the hardware I need. I will need 2 lefts and 2 rights. Regards, Larry

Swisco, Please confirm for me the operator that I need to get my window working agaign. I need, for two windows, a left and a right straight arm operator. There is just one number stamped on the arm top, 39 My guess is that I need 39-094 and 39-095. These Andersen windows were installed in the ... (cont.)

Hi, I'm looking for a set of replacement hardware for an Andersen window. See attached pictures, I have many installed like the one that needs replacing. The markings on the arm say "7191 2" and on the handle they say "7191 8". I'd like to get an exact match since I have many others that I'm not ... (cont.)

The small plastic 1 inch piece that connects the crank arm (approx 11") into the metal runner on the 22x45 window is broken. Do I replace the whole arm & crank?

Anderson part number 1361310 and0532408 7191 stone