Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

looking for a right hand casement operator. the numbers on them are OP05-7553-03 with a time stamp of 10/17/03 15:19:47. on the arm op052020

I need to get a replacement hardware for my casement window ,the only number I could see in the main unit is 0p05-1505 ... The arms have different # each one (0p05-2017, 0p05-2016, 0p05-2019 and 0p05-2018). Please advise the correct part number to replace this defective part.

Hi, I have some Milgard casement windows with hand cranks. We recently put in plantation shutters. One of the frames of the shutters is not allowing the crank enough clearance. I noticed that another window in our home has a different type of opener, a knob. See below. Could I get one of those to re ... (cont.)

What handles do I need for windows dyad crank 5

Operator ID Help

Sorry I don't have any other pictures of this one. It was sent to me from a job site. Could you possibly identify it or something close? Thank you! -Suzanne

Looking for this part

The replacement cover, 39-107FK is loose and moves when the handle is turned. Is there a way to secure it or should I continue to use the 39-107 covers and purchase the 39-205 crank handle?

Im looking for 3- Left Hand and 3- Right hand operators in white like in the attached picture. I also need 19 white folding crank handles that wit fit this unit Please advise as to availability and pricing along with part numbers Thank You in advance Jeff

I've already ordered the handles for 2 windows without realizing I needed to replace the crank mechanism. Here are the pictures I took. Currently we're not living in the house. I didn't have pen & paper to write down numbers. Thought my picture would show it, but it didn't. I can get them later ... (cont.)

The theft broke in damage the window operator.

The crank handle mount completely broke and the handle has come out. The windows are rather old (CertainTeed). The long arm appears to be 9". The assembly is TRUTH and shows number 40471 stamped on the base. The short articulated arm shows 20810 on the end by the window attachment and 30841L on ... (cont.)

Looks to be manufactured by TRUTH. Has multiple number stampings. Gear area - 40471. Short arm - 20755 and 3084IL. Long arm stamped "Entry Gard".

I want to purchase universal joint with pole ring and the extension pole. The handle on the windows is a Truth with the numeral 3 under the name. The handle hole does not look like the ones on the site. It is round except on one side on the circle with a notched straight cut out. It measures 11/3 ... (cont.)

I am pretty sure that these are 39-031 and 39-032, but just wanted to check before placing the order. Also want to confirm that I can use 39-107 fk with these as a replacement for something that looks 39-107 + 39 114L. I have a bunch of windows that need new hardware and wonder if it is common ... (cont.)

I have three 1986 era Hurd casement windows with traditional gold tone Hurd cranks for which I have ordered new window treatments (dual roller shades) I would like to replace the existing crank handles with T-handles so the roller shades will not interfere. The spline bore looks to be 3/8" inn ... (cont.)

I need 2 of this part. The diameter of the window assembly barrel appears to be 7/32 of an inch and the diameter of the crank socket appear to be 11/32 of an inch. Can you tell what I need? On the cranks that broke, the black plastic piece fell out, revealing a #1208 on the white metal piece. ... (cont.)

This was broken due to force. It is a folding handle and I have no clue what parts I need. There is a spring, a pin, a piece of plastic and a black metal housing that fits over the sprocket on the window opener. The handle is stamped "2108" and I read on your website - "The Folding crank handle 39-2 ... (cont.)

I talked with a K&K customer service rep and they gave me the following information from what I described to them. Operator: left - 5054390 right - 5057010 Crank handle: 5016830 Crank cover: 5007680 Before I proceed to order anything I wanted to double check that these are the parts ... (cont.)

Will this crank work with a Millard window?W