Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

2 broken window cranks for a bow window. I do not know manufacturer and neither did the previous homeowner

Left and right I need the complete assembly

I have an older crestline installed window. The crank is no longer working - can't open or close the window. It has a pin that should go in to line up with the gears so the crank will do it's work but I cannot get that back in to its correct place. I am wondering if I should just try to get a new cr ... (cont.)

Only marks = Made in USAJust need the housing/crank not the window hardware (already installed) (Painters removed and then lost them!)

I have one bar (arm) Truth hinges with the number 40942-A stamped on the bottom hinge. I'm assuming these are no longer being made (they are on 25+ years old Marvin windows). Does the 2 arm- Right Hand (Standard) Casement Window Hinge Assembled 10" replace the old one arm 40942-A. Will I need a ... (cont.)

Which operator do I need? Casement window is 27" wide. Short arm 4 7/16" Left handed. Is it returnable if the repair man to fix broken glass has an operator in stock?

Looking for a window handle

I have Loewen windows that were installed 2001 or so.Screen pins.Awning window cranking mechanism.

Please advise which folding crank handle I would need for the operator

Made in USA; it says TRUTH on the top side of the arm

Hi, Can I replace stem. handle and cover, or comleete mechanism for this RT side casement window?

There is a main "Entry Gard" arm. But there is a smaller arm at the top of casement window and at the bottom. The top is fine. The problem is that the home sat for 5 years and the bottom small arm rusted off. #6799 in the pictures. Its a 6" piece that connects to a screwed in piece on the botto ... (cont.)

Need replacing them. Windows will open but not close.

Hi, I need to replace the left and right side, could you please tell me what do I need to order. Thank you

Hi, I'm having trouble finding a crank handle for this window. The pin that holds the handle on came out and was lost and I cannot figure out what handle would attach to this crank. Appreciate any help you can provide. Thanks,

From what I've found I have FERCO brand windows, the arm that attaches to the window frame is 71/2" and the sliding arm is 7". I also need the opening mechanism as the housing is cracked.

Hi, I have two roto operators that have failed. Both are marked EntryGard Truth. Both have smaller arm length of 4.5 inch and longer arm length of 9.5 inch:Right roto operator has 20810Left roto operator has 31538If you could let me know what parts to order, I would appreciate it. I also need a new ... (cont.)

I have a double casement window with two operators. one side opens right and the other side opens left. Both old operators are bad and I need replacements for both.

These pics are from the right window, the left is broken can't open it right now. the parts is Entrygard true #31229

Please determine if you have a suitable replacement for this awning control. I have several other similar windows with broken handles, but this one is most critical. Please let me know if you have a replacement and I will complete the order. Thank you.