Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

Hello My Truth Casement Operator is faulty and needs t o be replaced. Could you please suggest a replacement? Thank you!

I'm looking to replace the operator mechanism and the clip attached to the window. Prefer a white, fold away crank. It would be ok if the window had to open a few more inches. Can you suggest the parts? Thank youTom

I would like to replace the pictured wing handles to foldable crank handles. First is that possible? And After reviewing your info I'm thinking 39-114L but I'd prefer a foldable style handle. Would 39-205 work? Thank you.

Based on the markings on this handle, I believe it is a TRUTH handle. However, I don't know the the spline size. I measured the opening it looks like it is a little less than 3/8. Can you confirm from the pictures.

I currently have handle Code: 39-114L in use on my casement windows and want something a bit more compact so blinds can lower. Is 39-205 able to be swapped out to get a more compact result or would more modification be needed by swapping out the assembly?

Does the replacement folding handle for come with the screw and other parts shown in pictures?

I have attached photos of some window cranks that I need from what I can see is the part number is 30744B.

It has number on it looks like 30841L on the arm that comes off the gear. Thanks

Came off a certainteed window

Need a replacement folding crank handle option For my 21 year old PlyGem wood casement windows. Crank case is marked with an "MW".

Looking for window crank, the handle pulls out of the mechanism, can I just replace the crank or does the entire assembly require replacement?

I will appreciate your help in identifying the operator for a casement window I have. I ordered two folding crank handles item # 39-205 which arrived today, and they are an exact match. But as I feared, turns out that the operator is also broken. I have taken 8 pictures of the operator mechanis ... (cont.)

Looking for replacement window folding crank handles for a 5/16 inch diameter crank. The mechanism is TRUTH

My window is inscribed with - 1 Window 10-69. There is nothing else on the glass or the hardware. I need to replace an opening handle like the one pictured above. The arms that open the window are 12" long. It is an awning style window, and the visible glass measures 3

Good morning. moved into a new house with a broken window crank. Would like to buy a replacement, and hopefully get instructions how to swap it out, even though it looks pretty basic.If possible I would only like to buy the small broken black plastic piece.The window is low to the ground and cranks ... (cont.)

Replacement window crankCan you please help me identify this part for my windowsI've been having trouble finding it and I need a couple dozen

I have a window crank that works fine once the window is partly open, but is not able to close to lock or open once unlocked. From the inside window cranks from left and swings open on the right. How do you measure the length of the crank?

Picture with my hand I need the rod guides ( white plastic ) 6 of them Opening mechanism handle cap and or complete opening mechanism and back screw to secure

Hello! I saw a very helpful Swisco video about replacing this part. I have an awning window in my bathroom that will not close. When I would turn the crank, nothing would happen. It's difficult to determine what size dual arm crank I need to use. Also, when I took out the screen, I could see that ma ... (cont.)

I'm looking for these plastic covers to cover the casement operator. They don't snap in, but have double backed tape to hold in place and come in right and left hand versions. The crank handle is a truth handle with us pat 361490 5560082 stamped in it. I've found the handle on your site but not ... (cont.)