Viewing all customer Discussions for:

55-006 3' Capitol Snap-in

Replacing glass for aluminum window on manufactured home. Looking for correct snap in glazing. I included pics but glazing is old and chipped so want to verify I'm getting correct ones.

I am looking for the plastic snap in strips that border the glass on the outside ofAlenco windows. I have attached a picture. The part I need is the one with the small hole in it.

I wasn't given any information so I'm not too sure. I need a part number. Thank you!

would you have something that matches this piece here? I sent dimensions as well. What would you recommend?

Hello, I'm looking to confirm these are silverline windows and order parts for refurbishment. Is this a 39-025 operator? Also, looking to identify the vinyl. 3/4 width. 5/16 height.

Milgard said my part number is VA0210HHGBBL. The closest I can find in your parts is 55-195. Is this a suitable substitute? If not is there a better substitute?The photo is a cross section of the glazing bead that I cut from a piece that is falling out. As you can see, the bead has collapsed, an ... (cont.)

Hello, Recently purchased home appears to have snap in glazing missing from a few of the windows. The larger window, second from right has the bottom and sides missing and appears to be loose in the frame. A neighbor in the same style home with same windows had a window fall out. We are looking t ... (cont.)

1970s modular home, aluminum windows, unknown manufacturer. Widows need new vinyl glazing strips. The picture is a profile of the strip. The color is white. Do you have glazing strips that match or my work? Bob

I am trying to refurnish my Pan Am awning windows (single pane). Windows where installed in 1989 I need to replace the alum glazing bead (the exposed side is about 3/4"). Also, I am having trouble getting the glazing bead out of the window. It does not snap in and out easily. I am including a dr ... (cont.)

Hope this enough information. I have 43 pieces of window glaze that goes around typical window as shown. They are a little over 13" high and 9+" wide. I did not count the vertical/horizontal runs. I am looking to identify the plastic glaze and the amount I should order. This is my second reques ... (cont.)

I have 1994 single hung HARCAR windows with individual window panes. I'm handy, and need to identify the aluminum glazing required to replace these window panes. See pictures of windows and glazing.

I replaced window beads around six windows and one door window in my rear lanai. I went back to the window place where I purchased them and they have none in stock that are an exact match anymore - Sold out and not sure when they will get anything similar. Looking for 5 more 6' strips to finish a co ... (cont.)

I need help finding the replacement information for this aluminum glazing.I was not able to find any manufacturer name, numbers or any other markings on window. The windows were installed 30 years ago (1993) in South Florida.It was difficult not distorting the aluminum glazing when I removed it sin ... (cont.)

It is a grey plastic (vinyl) extrusion.

I need some bronze snap in glazing bead the profile is real small can you point me in the right direction please? Thanks Michael Hinton

Hi - really hope you can help. I have some really old spring balances, a few of which (12) need replacing. The only marking on these is 2420X. They measure 9/16" x 5/8" x 25" (25-3/8" if you include the bottom nylon runner).

Gray vinyl glazing 3/8 x 9/16 is what i measured. would 3/8 x 5/8 work for me ?

Snap-in glazing I am looking for is the color bronze or dark brown. Window manufacturer is Alenco.Thanks in advance for your help. Manuel

Is this the 55?006 that matches the muntin shown?

3' CAPITOL SNAP-IN Product Code: 55-006 I have purchased many pieces. How do you get the old one out? First one came out fine. Second window I cracked and third window got most out Please advise. Larry