Viewing all customer Discussions for:

55-008 3' WT Snap-in

Trying to find glazing strips to repair broken window pane in aluminum window. Measurements are 7/16 on flat side, 7/16 across bottom and 5/16 high (including hook) side.

Hey guys...needing help finding 28ft of this style snap in glazing. Its 30yrs old and on many windows brittle, cracking or bowing out. Can you help? Much appreciated

Hi. We need enough of the gray vinyl snap-in to finish our one window pane.Horizontal is 23".Vertical is 14 1/2"

Hello, I'm looking for help identifying the right replacement part for this glazing bead. There are no markings on the piece. The house was built in 1989 and I think these are original to the house. Picture attached. the side with the "lips" (shorter side) is 11/32in, the longest side is 33/64in ... (cont.)

What do you recommend for replacing this glazing bead ? ½ wide 3/8 channel 1/16 smaller channel

Need 2 pcs aluminum and a pane broke 12x12

Please help locate a replacement

curved leg: 9/16" short leg 1/4" to 5/16"

I am curious if you have access to this style of glazing bead. The windows were built in 1987 and recently the insulated unit have fogged and I have got some replacement units for the same. In removing the bead, I torqued a piece badly enough that it will need replacement. The piece is 3 ... (cont.)

Looking for this snap-in glass retainer. Aluminum.

I am a homeowner looking for replacement glazing bead for some aluminum windows

Hi my name is Johnny and my house was build in 1980. window glazing bead needs to be replaced, all of them, I haven't calculate the total length but i will, just try to find the right seller first. please see attached photo and let me know if u need more information if you do have the party ... (cont.)

It looks like the attached drawing, with a return on the bottom that sits flat against the pane. Dimensions are approximate. Black PVC.

Would you be kind enough to help me identify this piece of glazing? The flat piece sticking out to the left is 1/8", the height from the flat piece up is 1/4" and the slanted piece from edge to edge is 7/16"

The samples I ordered (55-008, 55-016 and 55-202) do not work properly. I am sending some photos and measurements. Would it be possible if you can send me a sample with the correct measurements?

I am trying to find this aluminum glazing.

My name is Jim Feszchak, I have enclosed photos of my aluminum basement window removable inner frame, also photos of the snap-in glazing. It measure approximately 5/16

I was wondering which part would replace my current glazing bead. In the flat side it measures 7/16 to the ridge and then 8/16 from edge to edge. The lip measures between 5/16 where it curves to snap in under the glass. Thanks

No markings found.

Can you identify this?